Aboled Sc-ds-d 2014-i Kontroller
| Terminal | Signal | Description | |----------|-------------|--------------------------------------| | VIN+ | DC+ | Positive input (12-48V DC) | | VIN- | DC- | Negative input / ground | | LED+ | LED+ | Positive output to LED load | | LED- | LED- | Negative output (current regulated) | | CTRL+ | Dim+ | 0-10V / PWM+ / DALI+ (depending on variant) | | CTRL- | Dim- | Common / ground for control signal |
Note: Always verify pinout on the unit’s label as revisions may differ. Aboled sc-ds-d 2014-i kontroller
When this controller begins to fail, you will see specific error codes. Here is a field guide: Note: Always verify pinout on the unit’s label
| Parameter | Value | |-----------|-------| | Input Voltage | 230/400 VAC (50/60 Hz) | | Control Logic | 24V DC isolated | | Max Current | 15 A continuous / 30 A peak | | Protection Class | IP20 (cabinet installation) | | Communication | RS-485, Modbus RTU | | Ambient Temp Range | 0°C to 50°C | | Dimensions (WxHxD) | 120 x 260 x 180 mm | When this controller begins to fail, you will
The SLC 500 utilizes a modular chassis system available in 4, 7, 10, and 13-slot configurations. The controller and I/O modules are inserted into these slots. The system requires a dedicated power supply (typically the 1746-P series) which converts AC or DC line voltage into the low-voltage DC required by the chassis backplane.








.png)
.avif)







