Acer Q65h2-am V1.1 Manual -

The most requested section of any Acer Q65H2-AM v1.1 manual is the front panel connector. Acer uses a non-standard layout compared to Intel’s standard. Do not guess—you will short the board.

Location: Bottom right corner. Labeled "F_PANEL" (6x2 pins, but pin 10 is missing).

Here is the exact pinout looking at the board with the PCIe slots pointing down: acer q65h2-am v1.1 manual

| Pin | Signal | Pin | Signal | | :--- | :--- | :--- | :--- | | 1 | HDD LED (+) | 2 | Power LED (+) | | 3 | HDD LED (-) | 4 | Power LED (-) | | 5 | Ground | 6 | Power Button (+) | | 7 | Ground | 8 | Power Button (-) | | 9 | Reserved | 10 | Key (Missing pin) | | 11 | Ground | 12 | Speaker (5V) |

How to wire this:

The Q65H2-AM supports Dual-Channel memory architecture.

Installation Guide:

| Jumper | Function | |---------|------------------------------------------------| | CMOS (CLR_CMOS) | Near the coin cell battery – short pins 2-3 to clear, then back to 1-2. | | ME_UPDATE | Rarely touched – used for Intel Management Engine recovery. | | PSWD | Two-pin jumper – remove to clear BIOS password. |

Locations vary slightly; look for white labels silkscreened on the PCB. The most requested section of any Acer Q65H2-AM v1