Acer Socket Lga775 Pcie Motherboard 915m08g8ks Manual
This motherboard was commonly found in Acer Aspire T-series desktops (e.g., Aspire T160, T180, T620) and Acer Power series workstations circa 2004–2006.
+---------------------------------------------------+
| PS/2 | USB | LAN | VGA | COM | LPT | Audio | (Rear I/O)
+---------------------------------------------------+
| CPU_FAN [LGA775 Socket] | DIMM1 | DIMM2 |
| ATX12V Capacitors | | |
| --------- +-------+-------+
| PCIe x16 |
| --------- |
| PCIe x1 |
| --------- |
| PCI #1 |
| --------- |
| PCI #2 |
| --------- |
| CMOS Batt | SYS_FAN | IDE | SATA1-4 | Front USB|
| CLR_CMOS | Front Audio | F_PANEL (Power, HDD)|
+---------------------------------------------------+
Without the manual, owners of this board encounter three specific problems. Here is how the manual solves them. acer socket lga775 pcie motherboard 915m08g8ks manual
The manual clearly states that the front panel header supports Intel AC’97, not HD Audio. You will need to change your case’s audio cable from the "HD Audio" plug to the "AC’97" plug (if your case supports it) or manually re-route pins 1-10. This motherboard was commonly found in Acer Aspire
Third-party Manual Repositories
Key content the manual will include:
The Acer 915M08G8KS is a micro-ATX (µATX) motherboard designed for Intel Pentium 4 and Celeron D processors. It features the Intel 915G chipset with integrated Intel GMA 900 graphics, PCI Express x16 slot, and support for DDR/DDR2 memory (depending on revision). Without the manual, owners of this board encounter
| Header / Jumper | Pins | Function | |----------------|------|----------| | CMOS clear (CLR_CMOS) | 3 pins (1-2 = normal, 2-3 = clear) | Clear BIOS – unplug PSU, move jumper, wait 10 sec | | Front panel (F_PANEL) | 9 pins | Pinout: 1=HDD_LED+, 2=PWR_LED+, 3=HDD_LED-, 4=PWR_LED-, 5=GND, 6=PWR_SW, 7=RST_SW, 8=GND, 9=empty | | USB headers (F_USB1/2) | 9 pins (4+5) | Standard: VCC, D-, D+, GND, GND (pin 9 = key) | | Audio header (F_AUDIO) | 9 pins | AC’97 (not HD Audio) – check pin 4 = VCC, pin 5 = GND, pin 9 = Key | | SATA ports | 2x | Black = SATA0 (boot), Blue = SATA1 | | IDE (PATA) | 40-pin | Primary only – max 2 devices (jumper master/slave) |