Amlogic S805 Firmware May 2026

Most S805 boxes shipped with KitKat (4.4.2). A few later versions got Lollipop (5.1.1). Stock firmware is necessary if you need wide app compatibility (e.g., Netflix, YouTube legacy). However, do not expect security updates or smooth performance.

| Problem | Likely Cause | Solution | |--------|--------------|----------| | Flashing stuck at 7% | Mismatched DDR memory config | Find firmware that matches your RAM type (DDR3 vs LPDDR) | | Flashing stuck at 98% | NAND erase error | Check "Erase Flash" option in USB Burning Tool | | No Wi-Fi after flash | Wrong driver for chip | Boot to Android, open terminal, type dmesg \| grep wifi to see detected chip | | Remote not working | Different remote.conf file | Extract remote.conf from old firmware and replace in new ROM | | Bootloop after LibreELEC | Bad DTB file | Rename dtb.img to match your board (e.g., meson8b-m201c.dtb) | amlogic s805 firmware

Once your firmware is flashed:

Yes. Short the NAND pins (pins 7 and 8 of the NAND chip) while powering on, then reflash via USB Burning Tool. This forces USB boot mode. Most S805 boxes shipped with KitKat (4

For video playback (KODI), LibreELEC is far faster and more stable. For general apps, Android is your only choice, but expect slowdowns. Once your firmware is flashed: Yes