Before diving into the instructions, confirm which device you own. The keyword "bnd50 se36" typically refers to one of two configurations:
How to tell: Look at the ports.
This guide covers both in separate sections. Skip to the relevant part.
To understand the instructions, you must first identify the parts. A complete set usually includes:
Before starting any cycle, the following preparatory steps must be taken to ensure cleaning efficacy and prevent mechanical damage. bnd50 se36 instructions full
4.1 Loading the Lower Rack:
4.2 Loading the Upper Rack:
4.3 Loading the Third Rack (VarioDrawer):
4.4 Loading the Cutlery Basket (If Applicable): Scan Type: Select Full Scan for first-time setup
4.5 Detergent and Rinse Aid:
Regardless of the variant, follow these safety rules:
The BND50 supports four operational modes. Access by pressing the MODE button on the board:
| Mode | LED color | Behavior | |------|-----------|----------| | Toggle | Green | Press remote button → relay ON. Press again → relay OFF. | | Momentary | Red | Relay stays ON only while remote button is held. | | Latching | Blue | Relay changes state with each remote press, survives power cycle. | | Timer (1–60s) | Yellow | Relay turns ON for set seconds then auto-OFF. | Before diving into the instructions, confirm which device
Set timer duration: In Timer mode, press LEARN + MODE together, then use IN1/IN2 to adjust seconds.
The BND50-SE36 is characterized by its fully integrated control panel, located along the top edge of the door to maintain a seamless exterior aesthetic.
Key Technical Features:
The BND50 + SE36 combo isn’t plug-and-play for most printers. You’ll need: