Canon Ir1024 Default Admin Password -

Important nuance: The Canon IR1024 uses a System Manager ID along with a password. The default System Manager ID is:

When accessing the device via the physical control panel, you typically enter the ID and the password as the same numeric string.

Out of the box, Canon sets the System Manager settings to "blank."

Note: In many cases, the System Manager ID and PIN are left blank by default depending on the firmware version. If the numbers above do not work, try leaving both fields empty and pressing [OK] or [Log In].

If you are locked out and cannot log in with any default password, you have three recovery options—none of which are trivial.

If the password above doesn't work:

Related search suggestions:

The flickering fluorescent lights of the IT basement hummed in a low, mocking drone as Marcus stared at the Canon imageRUNNER 1024. To anyone else, it was just a beige box that smelled of ozone and hot paper. To Marcus, it was a gatekeeper holding his afternoon hostage.

His boss needed the quarterly reports scanned and emailed by 5:00 PM. It was 4:42 PM.

"Come on, you glorious relic," Marcus muttered, tapping the System Monitor button. The small LCD screen blinked back at him, demanding a System Manager ID and System PIN.

He tried the obvious first: 1111 for both. Invalid.He tried 1234567. Invalid.He even tried admin and password, knowing full well this machine was built before the world decided those were bad ideas. Access Denied.

The silence of the basement was broken only by the sound of a ticking clock. Marcus pulled out his phone, his fingers flying across the screen as he searched for the digital skeleton key. He found an old forum thread from 2009 where a user named TonerTom had posted the "sacred" factory settings for the iR1024 series. "Okay, Tom, don't let me down," Marcus whispered. Canon Ir1024 Default Admin Password

He leaned over the keypad and punched in the magic numbers: 7654321 for the ID, and 7654321 for the PIN.

He held his breath. The machine whirred, a mechanical "thunk" echoed from the paper tray, and the screen transformed. [System Management Mode] appeared in blocky, triumphant text.

Marcus didn't waste a second. He configured the SMTP settings, slammed the reports into the ADF (Auto Document Feeder), and hit the green Start button. The machine sang as it pulled the pages through, digitizing the data and flinging it into the cloud just as the clock struck 4:58 PM.

As the "Sent" confirmation flashed on the screen, Marcus patted the top of the scanner. "Good talk, Canon. See you next quarter."

Subject: SOLVED: Canon IR1024 Default Admin Password & Factory Reset

Body:

If you are locked out of the Canon imageRUNNER 1024 (iR1024) and need to access the System Settings (Remote UI or device panel), here is the verified default credential information.

The Short Answer:

Important Notes: Unlike many Canon printers that use "Administrator" or "12345", the iR1024 series specifically requires the User ID: root and the Password: 7654321 .

If the default password does NOT work: Someone has changed it. There is no "backdoor" password. You have two options:

  • Via the Remote UI (Web Browser) :

    • Pro Tip for Network Access: If you cannot get into the device because you don't know the IP address, print the "User Data List":

    Troubleshooting:

    Let me know if this solved your issue.

    Tags: Canon iR1024 admin password, Canon 7654321, reset Canon imageRUNNER 1024, default credentials, factory reset.

    The default credentials for the Canon imageRUNNER 1024 (and most enterprise-grade imageRUNNER models) are: System Manager ID: 7654321 System Manager PIN: 7654321 🔑 Troubleshooting Login

    If the standard ID/PIN does not work, try these secondary defaults or steps: Username: Administrator (Case sensitive) Password: 7654321

    Check the sticker: Look near the serial number on the back/bottom for a "PWD" label .

    Firmware variation: On some newer firmware, the password is the device's 9-character Serial Number . 🛠️ How to Reset the Password

    If the defaults were changed and you are locked out, you can often reset them via Service Mode: Press Additional Functions (or Settings/Registration).

    Enter Service Mode (common sequence: press 2 and 8 simultaneously, then Additional Functions again). Navigate to Copier > Function > Clear. Select PWD-CLR (or Clear Password) and press OK .

    Restart the printer. It should return to the factory default "7654321." Important nuance: The Canon IR1024 uses a System

    💡 Quick Tip: For security, always change these defaults immediately after logging in. You can do this under Management Settings > User Management > System Manager Information Settings . If you'd like, let me know:

    If you are trying to log in via the physical panel or the Remote UI (web browser).

    If you need the steps for a specific task (like setting up Scan-to-Email). If the printer is showing a specific error code. Changing the System Manager ID and PIN - Canon

    Press (Settings/Registration). Press . Make the necessary changes to the System Manager settings, and press . Canon User Manual System Manager ID and PIN Factory Default Settings

    The default administrator credentials for the Canon imageRUNNER 1024 (iR1024) series typically consist of System Manager ID System Manager PIN Default Credentials

    For the majority of Canon imageRUNNER devices, including the , the factory default settings are: System Manager ID System Manager PIN Canon Knowledge Base

    In some interface configurations, you may be prompted for a username and password instead: : Administrator Canon User Manual How to Log In To access administrator settings on the device: Logging in as an Administrator - Canon User Manual

    Canon imageRUNNER 1024 (iR1024) series, the default administrator credentials used to access system settings or the Remote UI are typically: System Manager ID: System Password / PIN: Canon User Manual Common Alternatives

    If the standard numerical code does not work, try these common Canon defaults: Administrator (case-sensitive) / (standard for many inkjet and some laser models) Serial Number:

    The printer's serial number (found on a sticker at the back) often serves as the default password for newer firmware. Canon User Manual How to Log In via the Control Panel Additional Functions Settings/Registration Navigate to System Settings When prompted, enter for both the ID and the PIN using the numeric keypad. Canon User Manual How to Change the Password

    Once logged in, it is highly recommended to change the password for security: Logging in as an Administrator - Canon User Manual When accessing the device via the physical control