The Digi SM-500 is a robust label printing scale designed for pre-packaging and counter service. It features a dual-range high-accuracy weighing system, a large LCD operator display, and a thermal printer for adhesive labels.

Key Features:

Note: Programming steps can vary slightly by firmware version. Below is the standard Digi programming logic.

The Digi SM-500 is a robust, accurate digital scale that will serve you reliably for years if properly maintained. Remember these key points:

By following this manual, you’ll achieve precise, repeatable results for cooking, science, coin collecting, reloading, or any other task that demands exact weight measurement. digi sm-500 scale user manual

Document Version: 2.0 – Compatible with Digi SM-500 (all variants with 500g capacity). Last updated: January 2026.

End of User Manual

Title: Digi SM-500 Scale: Quick Start Guide & User Manual Overview Remove the weight

Post:

If you’ve just picked up a Digi SM-500 digital scale, you’re holding a reliable tool for precise weighing. While the full manual covers every technical detail, here’s a practical breakdown to get you weighing accurately right away.

If calibration weights aren’t available, use known masses (coins, packaged weights) only for rough checks; accuracy will be limited.

Perform periodic verification with certified weights to maintain traceability for commercial or legal-for-trade use.

Product Name: Digi SM-500 Precision Electronic Scale
Capacity: 500 grams (0.5 kg)
Readability/Accuracy: 0.01g or 0.1g (depending on variant – confirm on your unit’s faceplate)
Power Supply: 4 x AAA batteries or DC 6V/1A adapter (not always included) Verification: Place the 200g weight again – the

Press the UNIT button repeatedly to cycle through:

Tip: The SM-500 may also support dwt (pennyweight) or tl (tola) depending on firmware version.

Digi Sm-500 Scale User Manual Access

Wait, Check Out These Hot Games!