?

Rubik's Cube Simulator

Play with the online cube simulator on your computer or on your mobile phone.

Drag the pieces to make a face rotation or outside the cube to rotate the puzzle.

Apply a random scramble or go to full screen with the buttons.

Chrome Cube Lab
➤ Online Solver
×
Error messages will be shown when a cube is not scrambled properly.
Solution:
?

Rubik's Cube Solver

Calculate the solution for a scrambled cube puzzle in only 20 steps.

Set up the scramble pattern, press the Solve button and follow the instructions.

Use the color picker, apply an algorithm or use a random scramble.

Rubiks-Cube-Solver.com
➤ Stopwatch
?

Cube Timer

Measure your solution times on your journey of becoming a speedcuber!

Use your Space button or click the clock to start and stop the cube timer.

With scramble generator and instant statistics calculator.

Ruwix.com
➤ Tutorial

How to Solve the Rubik's Cube?

The beginner's solution guide with images and easy to follow instructions.

Knowing how to solve the Rubik's Cube is an impressive skill, and with a bit of patience, it’s easier to learn than you might think. You'll soon discover that solving it doesn’t require genius—just determination and practice!

In this tutorial we are going to use the easiest layer-by-layer method.

💡
It's advised to watch the attached video tutorial while using this cheat sheet explaining each step.
1

White Edges

Let's start with the white face. Try to form a white plus sign on the top of the cube, making sure that the colors of the side stickers also match the colors of the lateral centers. This step shouldn't be too hard. First, try to do it without reading the examples below, taking the time to familiarize yourself with the puzzle.

white edges correct way

We can easily insert the edge to the top if you move it to the highlighted bottom-front spot first. Depending on where the white sticker is facing do the rotations.

insert first edge
Case A:
White sticker facing down:		 F F
Case B:
White sticker facing  you:		 D R F' R'

Case C:
When the white edge is stuck between two solved edges you can send it to the bottom layer doing this:

L D L'

face rotation lettersI used capital letters to mark the clockwise face rotations: F (front), R (right), L (left), U (up), D (down).

Turns in the opposite direction are marked with an apostrophe. (')

Examples
2

Finish The White Face

solve cube white cornersWhen the white edges are solved we can move on to solve the white corners.

First, place the white corner corresponding to the position marked by the upper arrow into one of the highlighted spots. Next, repeat the algorithm below until the white piece comes to its desired destination.

R' D' R D

This trick sends the piece back and forth between the top and bottom locations, solved white facetwisting the corner in each step. Using this trick you can solve each white corner in less than 6 iterations.

At the end your cube should have a solid white face with the lateral stickers matching the lateral centers.

Examples
3

Center Layer

Turn your cube upside down because we don't need to work with the white face anymore.

We have a trick to insert an edge piece from the top-front position to the middle layer. Do the "Left" or "Right" algorithm depending on which side you have to insert the piece:

how to do center layer

Left:  U' L' U L U F U' F'
Right:  U R U' R' U' F' U F

solved center layerWhen a center layer piece is in its correct position, but oriented incorrectly then use the same algorithm to take it out, inserting another piece to replace it temporarily.

You'll have two solved layers when you finish this stage.
We're almost there.

More...
Ad
4

Yellow Cross

Inspect the top of your cube. You will see either a dot, an L-shape, a line or a yellow cross. Our goal is to form a yellow cross and we have a trick to go from one state to the other:

how to solve the rubiks cube

F R U R' U' F'

Use this algorithm to shift from one shape to the next one.

More...
5

Swap Edges

We have a yellow cross on the top but the edges are not in their final position yet. They need to match the side colors.

swap rubiks cube edges

R U R' U R U U R' U

Use these steps to swap the front and left yellow edges in the top layer.

6

Cycle Corners

Only the yellow corners are left unsolved at this point. Now we are going to put them in their final position and we'll rotate them in the last step.

Use the algorithm below to cycle the pieces in the direction marked with the arrows while the top-right-front piece is standing still.

cycle rubik algorithm
U R U' L' U R' U' L
7

Orient Corners

Everything is positioned, we just have to orient the yellow corners. We use the same algorithm that we used for solving the white corners in the second step:

R' D' R D

This step can be confusing for most people so read the explanation very carefully and do exactly what it says!

rotate pieces rubiks cube solution1. Hold the cube in your hand having an unsolved yellow corner in the highlighted top-right-front position.
2. Repeat the algorithm until this piece is solved.
3. Turn the top layer to bring another unsolved piece in the highlighted position.
4. Repeat R' D' R D until that one is also solved.
5. Do 3 and 4 for any other unsolved yellow corner.

Important!
⚠️ During the process it might seem that you have messed up the whole cube but don't worry because it will come together if you do it correctly, following the instructions.
⚠️ Always complete the whole R' D' R D algorithm, even if you see the yellow sticker pointing up. You still have to make a final D turn.

Examples
+

Video Tutorial

Watch these steps being explained in this video:

CubeSolve.com
➤ Back to top

Download Votol Software May 2026

Some well-moderated forums and Discord servers host verified copies:

A: Possibly false positive. Votol software is not signed with an EV certificate. Upload the file to VirusTotal. If 1–2 engines flag it (e.g., “RiskWare”), it’s likely safe. If 10+ flag it, delete immediately.

A: Not natively. You need Windows (7, 10, or 11) – or use a virtual machine (VMware, VirtualBox) with USB passthrough. Wine/Lutris generally fails due to serial port timing.

Votol is a compact, user-friendly tool for programming and configuring motor controllers (e.g., VESC-based ESCs) typically used in DIY electric skateboards, e-bikes, and robotics. This post walks through downloading the official Votol configuration software, installing it on Windows/macOS, and getting started safely.

Votol software is the primary tool for programming and tuning Votol sine wave controllers (like the EM50, EM100, and EM150 series) to optimize electric motorcycle and scooter performance. Where to Download Votol Software

Official software is typically distributed through manufacturer and authorized partner sites.

Official Manufacturer: The Votol After Sales Page provides links to Votol Software and Votol EM-2 series software.

Authorized Distributors: Platforms like SiAECOSYS and Deller.pro host direct download links for the standard Votol Controller Software and the specific EM-2SP version.

Community Repositories: Advanced users often find specific firmware versions (.bin or .ini files) on community forums like Endless Sphere. Software Version Compatibility

Using the correct version is critical to avoid connection errors:

Version V60 (Latest): Optimized to be compatible with all Votol controller series.

-2 Series Software: Specifically for models like the EM150-2SP and EM200-2.

Standard Software: For non "-2" series models, such as the standard Votol EM150. Installation and Connection Guide

USB Driver: Download and install the CH341SER.EXE or "USB-to-serial" driver to ensure your Windows PC recognizes the programming cable.

Hardware Connection: Connect the controller to your PC using a Votol-specific USB-to-serial (TTL) cable. Ensure the controller is powered on (often requiring the electric lock wire to be connected to B+).

Port Selection: Open the software and identify the correct COM Port in your PC's Device Manager. Manually select or type this port into the Votol software.

Connecting: Enable the CAN setting (if your controller supports it) before clicking "Open" and then "Connect". Mobile Apps & Bluetooth

While a desktop PC is the standard for full tuning, some models support mobile configuration:

Votol Software: Version Introduction, Download & Installation

Votol software is the primary tool for tuning Votol controllers to match motors for optimal performance. The latest unified version, V60, is compatible with all series, replacing previous fragmented versions for specific models like the EM150-2SP. Software Download & Requirements Download Votol Software

Official Source: The software and manuals can be found on the SiAECOSYS official website.

Hardware Interface: A specialized USB-to-TTL serial adapter cable is required to connect the controller to a PC.

Drivers: You must install the appropriate USB-to-serial drivers (e.g., PL2303 or CH340) for your Windows version (Win 7, 8, or 10). Installation & Connection Steps

Install Drivers: Decompress and run the driver installer (e.g., CH341SER.EXE) before connecting the hardware.

Physical Connection: Plug the cable into the controller and then into the PC's USB port. Power on the controller/bike.

Identify COM Port: Check Windows Device Manager to see which COM port (e.g., COM3) the USB serial port has been assigned. Software Configuration: Open the Votol program.

Match the software's port setting to the COM port identified in Device Manager. Enable the CAN setting (if applicable) before connecting.

Connect: Click "Open" and then "Connect." The software should populate with data from the motor. Key Functions & Tips Parameter Management:

Param Write: Sends the current software settings to the controller.

Import Param: Loads a saved configuration file (.ini) into the software.

Save Param: Exports your current settings to a file on your PC for backup. Common Issues:

If you encounter "communication abnormal" errors, try switching the TX and RX wires or ensuring the driver is not being blocked by Windows updates.

Some controllers from specific manufacturers may be "locked," requiring special firmware files or specific unlock codes entered into the software's error count or brand boxes. Unlocked votol controller programming software - Facebook

You should receive a ZIP folder containing three critical items:

Do not type "Download Votol Software" into a search engine and click the first link. That is a recipe for a bricked controller or a ransomwared PC.

Instead, follow this 5-step safety protocol:

The Votol software is an incredibly powerful tool – arguably the most capable controller software for the price. But with great power comes great responsibility. Download wisely, configure patiently, and enjoy the ride.

Disclaimer: This guide is for informational purposes. Modifying your EV controller parameters can damage your batteries, motor, or controller and may void warranties. Always consult your component datasheets.

To download and set up Votol Controller Software , follow this complete guide based on the latest version and community standards. 1. Download Official Software Some well-moderated forums and Discord servers host verified

The software version you need depends on your specific controller model. Most modern Votol controllers (EM series) use common tuning tools. Official Source: The primary manufacturer, , provides the most reliable downloads on their Instructions for Use page Latest Universal Version:

version is the most recent upgrade, designed to be compatible with both the "-2" series (e.g., ) and older non-2 series controllers Community Links: For specific firmware versions (like files), the Endless Sphere forum maintains a dedicated firmware thread with various archives for 2. Required Hardware for Connection

You cannot connect via a standard USB cable alone; you need a dedicated USB-to-Serial TTL programming cable

The cable typically has four wires: Black (GND), Brown/Orange (TX/RX). You must install the USB serial drivers

(often Prolific or CH340) for your computer to recognize the cable as a 3. Setup and Connection Steps Once you have the software and hardware ready: Check Device Manager:

Plug in your USB cable and check the "Ports (COM & LPT)" section in Windows Device Manager to identify the assigned port number (e.g., Power the Controller:

The controller must be powered by your battery or a 12V-72V source (depending on model) to communicate. Configure the Software: Open the Votol software (often labeled as or similar). Select the matching in the software's dropdown menu. Enable the

option if your controller uses CAN communication (common on newer models). "Connect."

If successful, the software will populate with your controller's current data. 4. Troubleshooting Common Issues "Communication Abnormal":

This usually means the TX and RX wires are swapped. Try reversing the green/white or orange/brown wires. Driver Issues:

If the COM port doesn't appear, you may need an older version of the Prolific driver, as some cables use "clone" chips that modern Windows drivers block. Language Display:

If the software shows question marks instead of text, you may need to change your Windows non-Unicode language settings to Chinese (Simplified) wiring diagram for your EM-series model or help finding a compatible mobile app

Any problems downloading and installing the votol em software?

Downloading and installing Votol software is the first step toward fine-tuning your electric vehicle's performance. The software allows you to adjust critical parameters for EM series controllers

(like the EM150 or EM200) to optimize motor efficiency and power delivery. Software Download Sources

Official and community-trusted versions can be found through the following channels: SiAECOSYS Official Site SiAECOSYS Download Page provides the latest software versions, including the

release which is compatible with all Votol controller series. Endless Sphere Community

: For older firmware, specific driver files (like the Vino-USB driver), or .bin files, the VOTOL FIRMWARE thread is a comprehensive repository managed by DIY enthusiasts. Manuals & Documentation

: Specific programming manuals and USB driver installation guides are available from retailers like Deller.pro Installation & Connection Steps USB Driver : Install the "USB-to-serial" driver (often the CH341SER.EXE or Prolific driver) before connecting the controller. Hardware Connection A: Not natively

: Connect the controller to your PC using the specific Votol USB data cable. Note the wire colors (typically black, brown, orange, and blue) to ensure a secure fit. COM Port Configuration : Open your computer's Device Manager

to identify which COM port (e.g., COM3) the USB cable is using. Software Setup Launch the Votol software. Manually select or type the matching number in the software settings. Enable the CAN setting

if your controller supports it before clicking "Open" and "Connect". Deller.pro Common Troubleshooting Communication Abnormal

: This often stems from using incorrect drivers for "fake" Prolific chips or a mismatched COM port. Safety Tip : Always save your original parameters

before making any changes so you have a default configuration to revert to if the motor behaves unexpectedly. specific version

of the software for an EM-2 series or a standard EM-150 controller? VOTOL EM Controller Program Manual - Deller.pro

Understanding Votol Software for Electric Vehicle Controllers

Votol controllers, manufactured by companies like Siaecosys, serve as the primary management system for various electric vehicles, including e-mopeds and electric motorcycles. This software is used to interface with the controller to view diagnostics and manage system settings. Accessing the Software

The software used for these controllers, such as the Votol EM series, is specialized industrial software. It is generally not available through consumer app stores.

Manufacturer Support: The primary source for official software and the necessary USB-to-TTL drivers is the manufacturer's official technical support portal.

Documentation: Official manuals provided by the manufacturer are essential for understanding the specific communication protocols and hardware requirements for different controller models (e.g., EM-50, EM-100). Hardware Requirements

Connecting a computer to a Votol controller typically requires specific hardware interfaces:

Programming Cable: A dedicated USB-to-TTL serial adapter compatible with the controller's pinout.

Operating System: Most versions of the diagnostic software are designed for Windows-based environments.

Driver Installation: Proper communication requires the installation of specific chipset drivers (such as CH340 or PL2303) to allow the computer to recognize the connection via a COM port. Safety and Professional Calibration

Adjusting the parameters of an electric vehicle controller involves high-voltage systems and critical performance settings. It is important to note:

Risk of Damage: Incorrectly configuring current limits, voltage thresholds, or phase angles can result in permanent damage to the controller, the motor, or the battery.

Operational Safety: Improper settings can cause the vehicle to behave unpredictably, posing a risk to the rider and others.

Warranty and Compliance: Unauthorized modifications often void manufacturer warranties and may result in the vehicle no longer complying with local transportation regulations.

For these reasons, any calibration or troubleshooting involving Votol software should be conducted by trained technicians or under the strict guidance of the manufacturer's official technical documentation. Always ensure a backup of the original factory configuration is maintained before attempting any diagnostic procedures.