Dvb Select Type Error Samsung Tv Page
Rating: ⭐⭐☆☆☆ (Frustrating, but fixable)
Applies to: Samsung Smart TVs (2016–2024 models, especially those with DVB-T2/C/S2 tuners)
Many users see "DVB-C" and assume "C" stands for "Country" or "Common." It does not. If you select DVB-C with a standard antenna, your TV will try to decode encrypted cable frequencies. It will fail, find zero channels, and potentially lock the tuner into "Cable Mode."
How to revert: You cannot "switch" modes without a factory reset. Go to Settings > Broadcasting > Expert Settings > Tuning Mode. Change it back to "Air" (DVB-T) or "Satellite" (DVB-S). dvb select type error samsung tv
DVB (Digital Video Broadcasting) is the standard used for digital television signals. Samsung TVs utilize a DVB-T2/C/S2 tuner system.
The "Select Type Error" occurs when the TV's software attempts to process a signal stream that does not match the configured input mode. For example, if the TV is internally set to expect a "Cable" (DVB-C) signal stream but is receiving a "Terrestrial" (DVB-T/Antenna) frequency packet, the tuner cannot decode the service information (SI) tables, resulting in this specific error prompt. On TV remote: Press Home → Settings →
A "DVB select type error" on a Samsung TV indicates a problem selecting, decoding, or tuning a DVB (Digital Video Broadcasting) signal. This exam analyzes causes, diagnostic steps, technical mechanisms, and remediation options, and concludes with recommendations for users, installers, and manufacturers.
On TV remote: Press Home → Settings → Broadcasting → Expert Settings. Look for “DVB Select Type” or “Tuner Type”
Look for “DVB Select Type” or “Tuner Type” – choose the correct one.
Run Auto Tuning again to rescan channels.