| Param | Description | Typical value | |-------|-------------------------------------|-------------------------------| | 300 | Rapid traverse (G00) rate | 2000–10000 mm/min | | 301 | Cutting feedrate (max F) | 1000–4000 mm/min | | 307 | Feed forward gain (FFG) | 0–100 (higher = less lag) | | 312 | Position loop gain (Kp) | 3000–6000 (1/sec × 1000) |
Turn off machine. Hold - and . (Minus and Period) on the MDI keypad while powering on. This bypasses the dead memory alarm. Fanuc 10m Parameter Manual
These are numeric values (usually ranging from -32768 to +32767). They define physical characteristics. | Param | Description | Typical value |
Once you get a physical manual, digitize it immediately. Here is how to make it searchable: I have seen thousands of machines bricked by
I have seen thousands of machines bricked by misreading the manual. Avoid these errors:
The Fanuc 10M is a classic CNC control for milling machines (the “M” series). Its parameters are battery‑backed SRAM values that define machine geometry, axis configuration, servo tuning, options, and I/O behavior.
The official Fanuc 10M Parameter Manual (B‑54364EN/01 or later) is required for safe modification. No two machines use identical parameters – values depend on the builder (e.g., Mori Seiki, Kitamura, Samsung).
⚠️ Always back up all parameters (via RS‑232 or PPRINT) before making changes.