This is the most critical part. There is no single "universal" Fanuc 11M parameter list because the machine tool builder (e.g., Mazak, Mori Seiki, Kitamura, Haas, Leadwell, Yang) customizes parameters 0100 and above.
Your parameter list comes from two sources:
Control cutting feed rates and clamping. fanuc 11m parameter list
| Parameter # | Description |
| :--- | :--- |
| 0520 | Maximum Cutting Feedrate.
Clamps the maximum feed rate during G01, G02, G03 moves. |
| 0521 | Minimum Cutting Feedrate. |
| 0522 | Manual (JOG) Feedrate Maximum.
Limits how fast the machine moves in JOG mode. |
| 0523 | Manual Rapid Override. |
Fanuc published a "Yellow Book" (Connection Manual B–61853E) that defines the default meaning of each parameter. You can find these: This is the most critical part
No. 9000+ parameters are often hidden (machine builder specific). Enable via 8000.7=1 and reboot.
Related to tool length compensation (G43/G44) and cutter compensation (G41/G42). Related to tool length compensation (G43/G44) and cutter
| Parameter # | Description |
| :--- | :--- |
| 0600 | Tool Offset Memory Type.
Bit setting determining the number of tool offsets available (e.g., 16, 32, or 99 offsets). |
| 0601 | Tool Offset Geometry/Wear.
0 = Geometry and Wear pairs; 1 = Single offset value. |
| 0610 | Cutter Compensation Mode.
Bit settings for how the control handles tool nose radius compensation (Type C or Type A). |