If you flashed the firmware and now the toner light is permanently red:
It is important to distinguish between a Soft Reset and a Firmware Reset (often called a "Fix" or "Flash").
Yes, if:
No, if:
For most home users and small offices, downgrading the firmware on the Samsung ML-2160 / 2165 / 2160W / 2165W is the single most effective solution to resurrect a “bricked” printer that refuses to print due to toner locks.
Once you have successfully reset your firmware to a working version (e.g., 4.00.01.23), you must block future updates to avoid repeating this process.
Result: Your printer should now recognize the cartridge as full, and the error message should disappear.
Understanding Firmware Resets for Samsung ML-2160 & ML-2165 Series Resetting the firmware on Samsung ML-2160 Go to product viewer dialog for this item.
, and their wireless "W" counterparts is a common procedure used primarily to bypass "Toner Empty" errors or to allow the use of refilled cartridges without expensive replacement chips. Why Perform a Firmware Reset?
Samsung printers use a built-in counter that halts printing once a predetermined page limit is reached, regardless of whether the toner is actually empty. A firmware "fix" or reset modifies the printer's internal software so it no longer requires a valid toner chip to function, allowing you to:
Reuse original cartridges by simply refilling them with toner powder. firmware reset samsung ml 2160 2165 2160w 2165w
Eliminate chip costs, as the printer's counter will reset to 100% every time it is restarted.
Fix persistent errors where the printer fails to recognize a perfectly good compatible cartridge. Step 1: Gather Printer Information
Before attempting a firmware reset, you must know your printer's specific version.
Configuration Report: Hold the Print Screen / WPS button for about 10 seconds until the LED flashes once, then release.
Supplies Information: Hold the same button again for about 15 seconds until the LED stays green, then release.
Key Details to Note: Serial Number (SN), Firmware Version, and CRUM number. Step 2: Applying the Firmware Reset (The "Fix")
Warning: Incorrect firmware can permanently damage your printer. Ensure the file matches your specific version exactly.
A guide on firmware reset for Samsung ML-2160, ML-2165, ML-2160W, and ML-2165W printers. Here it is:
Warning: Before proceeding with the firmware reset, please be aware that this process can potentially void your printer's warranty and may cause unforeseen issues. Proceed at your own risk.
Required materials:
Step-by-Step Instructions:
Download the firmware reset file:
You can download the firmware reset file from the following links:
Extract the firmware reset file:
Extract the downloaded zip file to a folder on your computer.
Connect the printer to the computer:
Connect the printer to the computer using a USB cable.
Enter firmware reset mode:
The printer's LED should now be in firmware reset mode.
Update the firmware:
Flash the firmware reset file:
The firmware reset file will be flashed to the printer. This process may take a few minutes.
Restart the printer:
Once the firmware reset file has been successfully flashed, restart the printer.
Verify the reset:
After the printer has restarted, check the printer's settings and menu to ensure that the firmware reset was successful.
Troubleshooting tips:
Disclaimer: The information provided here is for educational purposes only. The author and the website are not responsible for any damage or issues that may arise from attempting to reset the firmware on your Samsung printer.
Again, please exercise caution and be aware of the potential risks before proceeding with the firmware reset. If you're unsure or uncomfortable with the process, consider consulting a professional or contacting Samsung support.