Ml194v-0 Motherboard Manual — Foxconn

Report ID: HARDWARE-ML194V-2026-01
Date: April 19, 2026
Subject: Documentation, Specifications, and Compatibility Analysis

Never download "Driver Updater 2025.exe." The FOXCONN ML194V-0 MOTHERBOARD MANUAL would direct you to Acer's support site.

Q: Is the Foxconn ML194V-0 manual the same as the IPXBL-SB manual? A: Yes, in most cases. HP used the "IPXBL-SB" (I-P-X-B-L) as their internal part number. The Foxconn ML194V-0 is the OEM manufacturer’s model.

Q: Can I install Windows 10 on this motherboard? A: Yes, but you will have to use NVIDIA’s legacy nForce drivers (v15.56 or earlier). There are no official Windows 10 drivers, but the generic Microsoft drivers work for basic functions. Note: Windows 10 will run slowly with less than 4GB of RAM.

Q: Where is the BIOS battery on the ML194V-0? A: The battery is a CR2032 coin cell. It is located between the PCIe x16 slot and the rear I/O panel, or near the chipset heatsink. The manual calls it "BAT1." FOXCONN ML194V-0 MOTHERBOARD MANUAL

You might ask: "Why spend time on a 15-year-old motherboard?"

These Foxconn boards are actually fantastic for building Retro Gaming Rigs. They support Windows XP and Windows 7 natively, have drivers that are stable, and the LGA 775 socket can handle some beefy quad-core CPUs (like the Q9550) that are still surprisingly capable for vintage gaming.

The single biggest reason people hunt for the Foxconn ML194V-0 manual is the Front Panel Header. The pins are tiny, unlabeled on the board, and plugging them in wrong means your power button won't work.

Here is the pinout you are looking for (Top row, left to right): Bottom row (Left to right):

Bottom row (Left to right):

Always connect the Power SW to pins 6 and 8. Polarity doesn't matter for the power switch, but it does for the LEDs.

Disclaimer: This is a concise, general-purpose manual based on typical Foxconn motherboard features for the ML194V-0 model family. Use this for reference only; consult the official Foxconn documentation or support for firmware updates, precise jumper/settings values, and safety information.

This is the #1 reason people look for this manual. You have a bundle of wires (Power SW, Reset SW, HDD LED, Power LED) and a row of pins on the board with no clear diagram. Always connect the Power SW to pins 6 and 8

Since the official manual is scarce, here is the standard Foxconn pinout for this generation of boards. Look for a set of 9 pins (sometimes 10 with one missing) usually labeled JFP1 or similar near the bottom edge.

Standard Foxconn Front Panel Layout:

  • Bottom Row (Left to Right):

    • (Note: Polarity (+/-) matters for LEDs. If the light doesn't work, just flip the connector. It won't damage the board.)

    Searching for the Foxconn ML194V-0 Motherboard Manual? You’ve come to the right place.

    If you are trying to identify, repair, or upgrade a computer that uses the Foxconn ML194V-0 motherboard, you already know that finding official documentation can be a challenge. This motherboard is a legacy OEM board, primarily found in pre-built systems from brands like HP, Compaq, and Lenovo from the late 2000s to early 2010s.

    Because this is an OEM board, Foxconn did not widely distribute a public manual for the "ML194V-0" model number alone. Instead, this board is often a variant of the Foxconn M61PMP-K or similar NVIDIA MCP61 series. In this comprehensive guide, we will serve as your functional manual, covering everything from BIOS settings and jumper configurations to front panel pinouts and upgrade limitations.