Gmr-32b Phase Controller Manual

The following specifications are standard for the GMR-32B series controllers:

Mains (Utility) Input: Similar voltage range for monitoring grid availability.

Operating Temperature: -25°C to +70°C.

Dimensions: Standard DIN rail or panel mount (approx. 144mm x 144mm frontal).

Protection IP Rating: IP54 (Front panel).

The GMR-32B supports several firing modes:

Mode selection varies by firmware. Refer to your manual’s flowchart.

Proper installation is critical for the safety and longevity of the unit.

CANbus Connection: If using electronic engine control, connect the CAN High and CAN Low wires to the engine ECU, ensuring proper shielding to prevent electromagnetic interference (EMI).

Correct wiring is critical for the device to accurately calculate phase angles and voltage levels.

Safety Warning: Ensure the main power is disconnected before performing wiring. Verify phase sequence using a separate tester before powering the GMR-32B.

The following specifications are standard for the GMR-32B series controllers:

Mains (Utility) Input: Similar voltage range for monitoring grid availability.

Operating Temperature: -25°C to +70°C.

Dimensions: Standard DIN rail or panel mount (approx. 144mm x 144mm frontal).

Protection IP Rating: IP54 (Front panel).

The GMR-32B supports several firing modes:

Mode selection varies by firmware. Refer to your manual’s flowchart.

Proper installation is critical for the safety and longevity of the unit.

CANbus Connection: If using electronic engine control, connect the CAN High and CAN Low wires to the engine ECU, ensuring proper shielding to prevent electromagnetic interference (EMI).

Correct wiring is critical for the device to accurately calculate phase angles and voltage levels.

Safety Warning: Ensure the main power is disconnected before performing wiring. Verify phase sequence using a separate tester before powering the GMR-32B.