Head 720p Action Camera User Manual

So, you just unboxed the Head 720p Action Camera. Whether you are strapping it to your helmet for a mountain bike trail, mounting it on your dash for a road trip, or taking it for a swim, this little camera is built tough.

However, budget-friendly action cameras often come with "Chinglish" manuals that are hard to read. Don't worry—we’ve decoded everything for you.

In this guide, we will cover the button layouts, menu settings, video modes, and the "secret" tricks to get the best footage out of your 720p camera.

  • Use M to select, OK to confirm.

    • ⚠️ Warning: Never mount the camera on the side of your head. This creates a “nodding” effect in footage. Always keep it central.

    Have fun capturing the action!

    Disclaimer: This guide is for generic 720p action cameras. If you have a specific brand name (e.g., Akaso, Crosstour, Dragon Touch), check their official website for firmware updates.

    Need more help? Drop a comment below with your specific "Head" camera model number, and we will help you troubleshoot Head 720p Action Camera User Manual

    The Head 720p Action Camera is an entry-level, compact device designed for budget-conscious outdoor enthusiasts. While it offers essential features like high-definition video capture and underwater capabilities, its simple interface requires a specific set of operational steps to ensure the best results. Quick Start Guide

    Install the Battery: Slide the battery cover on the bottom of the camera to open it. Insert the 900mAh battery according to the polarity guides and snap the cover back in place.

    Insert Memory Card: Use a microSD card (up to 32GB). For optimal performance, a Class 10 card is recommended to prevent video freezing or lag.

    Charge the Device: Connect the included micro USB cable to the camera's side port and a USB power source. A full charge typically takes about 50 minutes and provides roughly 1.5 to 2 hours of use.

    Power On: Press and hold the Power/Mode button on the front of the device until the notification light illuminates and you hear a startup sound. Camera Controls and Navigation

    The camera uses a simplified 3-to-4 button layout for all operations: So, you just unboxed the Head 720p Action Camera

    Power/Mode Button (Front): Long-press to power on/off. Short-press to cycle through modes: Video, Photo, Gallery (Playback), and Settings.

    OK/Shutter Button (Top): Press to start/stop video recording or to take a photo. In menus, this acts as the "Select" button.

    Up/Down Buttons (Side): Use these to navigate through menu options or browse files in the gallery. Essential Settings and Features

    To get the most out of your recordings, navigate to the Settings menu and consider these configurations: how to setup and use action camera

    Most user complaints come from pressing the wrong button at the wrong time. The Head 720p keeps it minimalist:

    Key takeaway from the manual: The camera does not automatically turn off when you stop recording. You must hold the Front Button for 3 seconds. Many users drain their battery by throwing a "sleeping" camera into their backpack. Use M to select, OK to confirm

    The camera body alone is only splash-proof (IPX4). For swimming, snorkeling, or rainstorms, you must use the included Waterproof Hard Case.

    How to use:

    Max depth: 30 meters (98 feet). Do not exceed 30m. After saltwater use, rinse the case with fresh water and dry thoroughly.

    Before you read the manual, make sure you have all the accessories. Your box should include:

    This camera shoots in 1280x720 resolution. It is not a 4K cinema rig. However, the manual explains how to make 720p look great: