A: Usually, yes. Hipcam DVRs also use admin / 123456. However, some DVRs use a default username 888888 and password 888888 for the admin GUI. Check the sticker on the bottom of the DVR unit.
Most home routers support a “Guest Wi-Fi” network. Connect your Hipcam camera to the Guest network. This isolates the camera from your PC and phone if it gets hacked.
The Hipcam default login (admin / 123456) is a feature for factory testing, not for daily use.
If you bought a used Hipcam camera or forgot to set it up properly, stop reading right now and go change the password. Your privacy is worth the two minutes it takes to update it.
Have you ever found a security camera with a default password still active? Let us know in the comments.
Disclaimer: This post is for educational purposes and network security awareness. Always ensure you have permission to access the devices you are configuring.
IP cameras and doorbells, the default login credentials are most commonly for both the username and password Common Default Credentials hipcam default login
Depending on the specific model or management software, you can try these standard combinations: (leave blank) Modern Setup (App-Based) For newer devices like the Hipcam Indoor Pro Doorbell Concierge , there is often no factory default password for the app. Instead, the setup process requires you to: Download the Google Play Create a unique account using your email address. Connect the device to your Wi-Fi by scanning the on the back of the unit. Accessing via RTSP
If you are trying to connect your camera to third-party software (like
), use the following RTSP URL format with the default credentials: rtsp://admin:admin@192.168.1.188:554 How to connect to Hipcam IP cameras - Home Security Camera
If you are in a hurry, here are the most common factory settings for Hipcam devices.
| Parameter | Default Value |
| --- | --- |
| IP Address | 192.168.1.10 or http://hipcam.com |
| Username | admin |
| Password | 123456 or 空白 (blank) |
| Port | 80 (HTTP) / 34567 (TCP) |
Important: Some older models use a blank password. Newer models (2018+) force you to create a password during the initial setup wizard. If you bought the camera used, the previous owner may have changed these settings. A: Usually, yes
Accessing your Hipcam via the default login is the easy part—keeping it safe is the responsibility that follows. Always ensure your firmware is up to date and consider isolating your IoT devices on a separate network VLAN if your router supports it. Stay safe
The default login credentials for Hipcam devices typically depend on the specific model and software interface being used. Common Default Credentials
For most Hipcam IP cameras and associated software (like the HiP2P Client), the default login information is: Username: admin Password: Blank (leave the field empty) or admin Alternative Credentials by Model
Depending on the specific hardware series or firmware version, you may also need to try these alternatives: Username: admin / Password: 123456
Username: guest / Password: guest (often for view-only access) Username: user / Password: user Login via Web Interface
If you are accessing the camera through a web browser, the default IP address is often : Default IP: 192.168.1.88 RTSP Port: 554 or 10554 Troubleshooting Tips Disclaimer: This post is for educational purposes and
Blog Title: Hipcam Default Login: The Backdoor You Need to Close Immediately
Meta Description: Using the default admin login for your Hipcam device? Here’s why that’s a major security risk and how to change it in under 2 minutes.
Published: April 21, 2026
If you’ve just unboxed a Hipcam camera or IP device, you might be eager to get it streaming. The fastest way to do that is using the default login credentials.
But here is the hard truth: If you don’t change the Hipcam default login, strangers can watch you.
Let’s look at what the default credentials are, why they are dangerous, and how to secure your feed.
Instead of port 80, change it to a random high port (e.g., 34582).
Changing the password is not difficult. Follow these instructions after logging into the web interface.