How Do I Reset My Parrot Mki9200 Without Remote -

When a Parrot MKi9200 loses its pairing memory or gets stuck on a logo screen, the standard advice is to go to Settings > Factory Reset. This requires the remote to scroll through the menus.

If you attempt to use the screen without the remote, you will find it unresponsive to touch (as the MKi9200 screen is not a touchscreen; it relies entirely on the remote for input).

To bypass this, we have to utilize the "Update Mode" trigger located on the main "brain" of the unit (the black box usually hidden behind your dashboard).

Before you begin, ensure you have the following:

If you are currently facing this problem, the review above is accurate: You cannot perform a full factory reset on the Parrot MKi9200 using only the hands-free screen or steering wheel controls.

Here are your only two viable options:

The MKi9200 consists of three parts: the screen, the microphone, and the control box (a black metal box roughly the size of a deck of cards). how do i reset my parrot mki9200 without remote

Resetting a Parrot MKi9200 without the original remote is possible if your vehicle has a Parrot Unika interface installed, which allows you to use your factory steering wheel buttons to navigate the menus.

Method 1: Reset via Steering Wheel Buttons (Unika Interface Required)

If you do not have the remote but your steering wheel controls can already operate the Parrot, follow this sequence:

Enter the Menu: Press the following sequence on your steering wheel: Track Forward, Track Back, Track Forward, Track Back.

Navigate to Settings: Use the Track Forward button to scroll to "Settings" and the Phone Button (Green/Accept Call) to enter.

Select Advanced Settings: Scroll down to "Advanced Settings" and press the Phone Button to confirm. When a Parrot MKi9200 loses its pairing memory

Factory Reset: Scroll to "Factory Reset" and press the Phone Button to confirm. The unit will clear its memory and reboot. Method 2: Manual Power Cycle (Soft Reset)

If you lack both the remote and the Unika interface, a physical power cycle can sometimes resolve minor glitches:

Disconnect Power: Locating the main control box (often hidden behind the dashboard or glovebox) and unplugging it for at least one hour can force a reboot.

Check Fuses: Simply turning off the ignition is often not enough, as the red wire provides permanent 12V power. You may need to pull the inline fuse on the Parrot wiring harness. Limitations Without a Remote

How to reset a Parrot MKi9200 without the remote - JustCarKits

This is the official hardware reset method and is the safest and most effective. Before you begin, ensure you have the following:

Step 1: Locate the Reset Hole Look at the back or the side of the small control screen (the color screen that shows the track info). You will find a tiny, circular pinhole no larger than 1mm across. It is often labelled "RESET" or has a small circular icon next to it.

Step 2: Power On the System Turn your car's ignition to the "Accessory" or "On" position so that the Parrot MKi9200 powers up and the screen lights up.

Step 3: Press and Hold the Reset Button Take your paperclip or pin, insert it straight into the reset hole, and press firmly until you feel a tactile click (like pressing a tiny button inside). Hold it down for approximately 10–15 seconds.

What to expect:

Step 4: Verify the Reset Once the system fully restarts, you will be greeted with the "Welcome to Parrot" voice prompt or a setup wizard. The unit will no longer remember your old phone. This confirms a successful factory reset.