Hunta — 145 Install

For a relay function, connect a 12V signal to the IGN terminal. This activates the HuntA 145 only when your vehicle ignition is on (prevents draining the starter battery).

Before diving into the hunta 145 install, let’s clarify what this kit does. The Hunta 145 is a three-wire hardwire cable:

Its unique feature is the adjustable voltage cut-off switch (usually 11.8V, 12V, 12.2V, or 12.4V). This prevents your car battery from dying when the dash cam runs in parking mode. hunta 145 install

Typical users apply the Hunta 145 to dash cams like:

Do not ignore these:

Once confirmed working:

Your job isn’t done once the camera powers on. Verify actual parking mode: For a relay function, connect a 12V signal

Some dash cams require enabling parking mode in the settings menu. Do this while the camera is on.

After completing the Hunta 145 install, run these tests: Its unique feature is the adjustable voltage cut-off

Here’s a clean, professional write-up for installing a Hunta 145 (typically a digital panel meter or process indicator, often used for industrial automation, temperature, pressure, or voltage/current monitoring).