Read this or you may destroy your device. "Flashing" firmware carries risks. If you interrupt the process or install the wrong file, you can "brick" your receiver (render it permanently unusable).

If the official website is down or missing the V9 Finder section, use this template to email support:

Subject: Firmware request – iBravebox V9 Finder (SN: XXXX)
Body:
Current firmware version: [e.g., V9_V2.0.1]
Hardware version: [from About Device]
Request: Latest stable firmware download link for V9 Finder.

Most users report receiving a response within 24–48 hours with a private download link.

Once you have the file (usually a .zip, .rar, or .abs file), do the following:

  • Recent change-log examples (from 2020–2022 entries on official site):

    • Many iBraveBox user groups share official firmware. Ask for the MD5 checksum to verify file integrity.

    What to avoid:

    A typical iBraveBox V9 Finder firmware download file name looks like:
    IBB_V9_FW_2.3.bin or V9_Finder_Upgrade_V1.9.abs.

    Updating the iBravebox V9 Finder is not a "one-click" OTA (Over-The-Air) process; it requires a PC (usually Windows) and a USB cable.

    The included PC software (often labeled "Ibravebox Tool" or "Upgrade Tool") is functional but utilitarian. It looks dated, resembling software from the early 2000s. However, it is effective. The process involves loading the .bin or .abs file, connecting the finder while holding the power button (to enter Boot Mode), and clicking "Upgrade."

    The Update Experience:

    Before touching the firmware file, prepare these items:

    Backup your current data:
    Go to Menu > Backup > User Database. Save your satellite list and transponders to the SD card. A firmware reset will erase custom data.