Maintenance Box Resetter For Epson L6170 May 2026

If you are using a maintenance box resetter for your Epson L6170, you must understand the physical limits of the waste ink.

If you only replace the box, the counter stays at 100%. Epson’s official solution is that you must take the printer to an authorized service center to have them reset it for $50-80 per visit. That’s why learning to reset yourself pays off in 1-2 uses.

If you own an Epson EcoTank L6170, you already know it’s a workhorse. It’s an all-in-one printer designed for high-volume printing with ultra-low ink costs. However, like all modern inkjet printers, it comes with a built-in “planned obsolescence” feature: the Maintenance Box (also known as the waste ink pad or ink collector).

After thousands of prints, your L6170 will eventually flash a dreaded error message: “Maintenance box is near end of service life” or “A printer’s internal component is at the end of its service life.” When this happens, the printer will lock up completely. maintenance box resetter for epson l6170

Many users are told they need to visit a service center or buy a brand-new printer. This is where the Maintenance Box Resetter for Epson L6170 becomes a lifesaver.

In this 2,500+ word guide, we’ll cover:

| Advantages | Disadvantages | | :--- | :--- | | Cost Saving: Cheaper than buying multiple replacement boxes. | Risk of Overflow: If you reset the chip but do not empty the physical pads, ink will eventually leak out of the printer. | | Convenience: No PC or drivers needed. | Warranty Void: Using non-OEM reset methods may void the Epson warranty. | | Eco-Friendly: Reduces plastic waste by reusing the box shell. | Chip Lifespan: Some chips have a "write limit" and may fail to reset after 2-3 attempts. | If you are using a maintenance box resetter

Before buying a resetter, confirm your L6170 is showing one of these exact messages:

| Error Code | Message on Screen | Meaning | |------------|-------------------|---------| | 0x9A | “Maintenance box is near the end of its service life.” | Warning only – you have ~15% life left. | | 0x9B | “Maintenance box is at the end of its service life. Replace with a new one.” | Printer is locked. Requires a new box AND a reset. | | 0x9C | “A printer’s internal component is at the end of its service life.” | Generic lockout – usually means waste ink counter full. |

Note: Simply replacing the physical maintenance box with a new one (Epson original or generic) will NOT clear the error on the L6170. The printer’s internal counter must be manually reset using dedicated software or a hardware resetter tool. If you own an Epson EcoTank L6170 ,

No — the Epson L6170 does not use a traditional maintenance box (ink pad waste counter) that can be reset with a standalone hardware resetter like older Epson models (e.g., L210, L355).

Instead, the L6170 is part of Epson’s newer EcoTank lineup. It uses a maintenance box (C9342 / T6712) that has a chip that must be:

The Epson L6170 is an EcoTank printer, meaning it has refillable ink tanks. But when the printer cleans its printhead (something it does automatically every few days or manually via software), it flushes a small amount of ink through the system to prevent clogs. That waste ink doesn’t evaporate; it drips into a sponge-filled plastic container called the Maintenance Box (Part Number: C9345 or T6710 depending on your region).

For most L6170 owners, the best balance is either a reputable hardware resetter or WICReset software.