Mikrotik Openvpn Config Generator May 2026

Open a terminal to your MikroTik. Paste the generated script. Run it line by line or as a block.

The generator also gives you a client .ovpn file. It looks like:

client
dev tun
proto tcp
remote 203.0.113.10 443
resolv-retry infinite
nobind
persist-key
persist-tun
auth SHA1
cipher AES-256-CBC
verb 3
<ca>
[---BEGIN CERTIFICATE---...]
</ca>

Save this as office.ovpn and distribute it to users. They can import it into OpenVPN Connect or any standard client. mikrotik openvpn config generator

If you are building a generator (Python snippet below), follow this exact order of operations:

The generator outputs a script similar to: Open a terminal to your MikroTik

# Add certificates (example)
/certificate add name=ca-crt common-name=CA
/certificate add name=server-crt common-name=server
...
Click "Generate". The tool outputs something like this (simplified):
# 1. Add VPN IP Pool
/ip pool add name=ovpn-pool ranges=10.12.12.2-10.12.12.100
Before writing code, you must understand these five critical directives. Save this as  office
| OpenVPN Directive | MikroTik Requirement | Why? |
| :--- | :--- | :--- |
| dev tun | Mandatory | RouterOS does not support tap mode. |
| proto | tcp or udp | UDP is faster; TCP is more firewall-friendly. |
| auth | SHA1, SHA256, SHA512 | Matches /ip ipsec proposal settings. |
| cipher | AES-128-CBC or AES-256-CBC | GCM ciphers require RouterOS v7+ with specific config. |
| tls-auth | Key direction 0 or 1 | RouterOS uses static key direction. Clients need key-direction 1. |

Critical Note: RouterOS uses tls-auth (not tls-crypt). Your generator must never output tls-crypt for standard v6/v7 compatibility.

RouterOS expects the CA certificate to be available before the server certificate. A generator sequences the /certificate import commands correctly. Doing this manually often leads to "certificate not found" errors.