Mori Seiki Ex Alarm List Online

The EX Alarm List is typically organized numerically, though the exact range can vary by machine series (e.g., DuraVertical, NL, NV, or MT series). The numbers themselves often carry implicit meaning:

A well-structured EX list will also provide a probable cause and recommended action for each code. For instance, an entry might read: mori seiki ex alarm list

EX2042 – LOW AIR PRESSURE Cause: Main air supply below 0.4 MPa. Action: Check shop air supply; inspect filter regulator unit for leaks or blockage. The EX Alarm List is typically organized numerically,

This actionable clarity transforms the alarm from a cryptic error into a guided troubleshooting step. A well-structured EX list will also provide a

| Alarm Code | Description | Probable Cause & Solution | | :--- | :--- | :--- | | E001 | Hydraulic Motor Overload | The hydraulic pump motor drew too much current.
• Check the hydraulic oil level (is it low?).
• Check for clogged suction filters.
• Check the thermal breaker in the electrical cabinet. | | E003 | Hydraulic Pressure Drop | System pressure dropped below the set threshold while the pump was running.
• Check for leaks in the lines.
• Check the pressure switch setting.
• Pump may be worn out. | | E004 | Lubrication Oil Low | The way lube reservoir is empty.
• Refill the way oil (typically Mobil Vactra #2).
• Check the float switch if the tank is full but the alarm persists. | | E005 | Lubrication Cycle Error | The system did not detect a pressure rise during the lube cycle.
• Check if the lubrication pump is working.
• Check for blocked lines or a broken distributor block. |

Record each occurrence with:

Entry-level Dura series share simpler alarms: