You have opted to download our latest BUSY Accounting Software. Before going ahead, you are required to fill-in the form given below. OR
If you wish to see a FREE DEMO, Call Our Experts On : +91-9999901702 / 9999901703 / 9999901704
The GM160 programming software ONLY communicates via true hardware COM ports (COM1, COM2, etc.). It does not recognize USB-to-Serial adapters natively.
To successfully program your Motorola GM160 today, gather these items:
You need to tell DOSBox to use your physical serial port. Open the dosbox-x.conf file in a text editor. Find the [serial] section and add or modify the line:
serial1=directserial realport:COM1
(Replace COM1 with the actual port number your USB adapter is using).
The Motorola GM160 (also sold under various regional models and OEM variants) is a reliable UHF/VHF mobile two-way radio used by small fleets, volunteer organizations, factories, and amateur radio enthusiasts. While the radio itself is straightforward to use on its front panel, programming it via software unlocks faster channel setup, precise frequency and PL/DTCS configuration, and bulk changes that save time. This long-form post covers everything you need to know about programming the GM160: what software and cables are used, how to install and configure them, step-by-step programming workflows, common advanced options, best practices, and troubleshooting.
Contents
Note: Because model variants and firmware differ, always confirm the specific CPS version compatible with your radio’s model and ROM date. If unsure, check the radio’s service manual or consult the vendor.
A. Install cable drivers
B. Install CPS software
C. Connect the radio
D. If "Read" fails
Example: Program channel 5 as a VHF repeater input
Q: Can I program GM160 with a generic cable? A: Some generic cables work, but ensure compatibility and reliable chipset drivers (FTDI preferred). Avoid cheap counterfeit chipsets that cause connection issues.
Q: Can programming brick the radio? A: Incorrect firmware flashes or interrupted writes can corrupt flash. Regular channel programming (read/write codeplug) is low risk if you follow backup and power precautions. motorola gm160 programming software
Q: Are there legal restrictions to programming frequencies? A: Yes — you must program only frequencies and power levels authorized by your radio license or permitted for your use (e.g., FRS/GMRS/Business/Amateur allocations differ by country).
If you want, I can:
Related search suggestions (for further research)
Yes, but with caveats. The GM160 is a narrowband-only radio? Actually, no—the original GM160 is wideband (25 kHz) only. If you live in a region (like the US) that fully mandated narrowband (12.5 kHz) for commercial use, you cannot legally use a GM160 on Part 90 frequencies. The GM160 programming software ONLY communicates via true
You have opted to download our latest BUSY Accounting Software. Before going ahead, you are required to fill-in the form given below. OR
If you wish to see a FREE DEMO, Call Our Experts On : +91-9999901702 / 9999901703 / 9999901704
The GM160 programming software ONLY communicates via true hardware COM ports (COM1, COM2, etc.). It does not recognize USB-to-Serial adapters natively.
To successfully program your Motorola GM160 today, gather these items:
You need to tell DOSBox to use your physical serial port. Open the dosbox-x.conf file in a text editor. Find the [serial] section and add or modify the line:
serial1=directserial realport:COM1
(Replace COM1 with the actual port number your USB adapter is using).
The Motorola GM160 (also sold under various regional models and OEM variants) is a reliable UHF/VHF mobile two-way radio used by small fleets, volunteer organizations, factories, and amateur radio enthusiasts. While the radio itself is straightforward to use on its front panel, programming it via software unlocks faster channel setup, precise frequency and PL/DTCS configuration, and bulk changes that save time. This long-form post covers everything you need to know about programming the GM160: what software and cables are used, how to install and configure them, step-by-step programming workflows, common advanced options, best practices, and troubleshooting.
Contents
Note: Because model variants and firmware differ, always confirm the specific CPS version compatible with your radio’s model and ROM date. If unsure, check the radio’s service manual or consult the vendor.
A. Install cable drivers
B. Install CPS software
C. Connect the radio
D. If "Read" fails
Example: Program channel 5 as a VHF repeater input
Q: Can I program GM160 with a generic cable? A: Some generic cables work, but ensure compatibility and reliable chipset drivers (FTDI preferred). Avoid cheap counterfeit chipsets that cause connection issues.
Q: Can programming brick the radio? A: Incorrect firmware flashes or interrupted writes can corrupt flash. Regular channel programming (read/write codeplug) is low risk if you follow backup and power precautions.
Q: Are there legal restrictions to programming frequencies? A: Yes — you must program only frequencies and power levels authorized by your radio license or permitted for your use (e.g., FRS/GMRS/Business/Amateur allocations differ by country).
If you want, I can:
Related search suggestions (for further research)
Yes, but with caveats. The GM160 is a narrowband-only radio? Actually, no—the original GM160 is wideband (25 kHz) only. If you live in a region (like the US) that fully mandated narrowband (12.5 kHz) for commercial use, you cannot legally use a GM160 on Part 90 frequencies.
