If you have been using Build 828 for a while, here are three advanced tweaks to enhance your workflow.
MOTOTRBO CPS 16.0 (Build 828) is an legacy version of Motorola's Customer Programming Software, primarily used for "Gen 1" and older "Gen 2" radios with firmware up to R02.09.00.0000. 1. Installation Requirements
Operating System: Windows (compatible with both 32-bit and 64-bit).
Software Prerequisites: You must install .NET Framework 4.6.2 before running the CPS installer.
Drivers: Ensure the MOTOTRBO FlashZap drivers are installed to facilitate communication between the PC and the radio. 2. Getting Started: Reading the Radio
Connect: Use the appropriate Motorola Programming Cable (e.g., PMKN4010 for repeaters or HKN6184 for mobile mics) to link the radio to your PC's USB port. Launch: Open CPS 16.0 Build 828.
Read: Click Device > Read from the menu or use the "Read" icon. This pulls the current "codeplug" (configuration file) from the radio. Mototrbo Cps 16 Build 828
Backup: Immediately save this original file (File > Save As) before making any changes so you have a restore point. 3. Core Configuration Steps
Once the codeplug is open, navigate the left-hand tree view to edit these essential settings:
MOTOTRBO CPS 16.0 Build 828 is the final "Legacy" version of Motorola's Customer Programming Software (CPS). Released in late 2018, it remains a critical tool for technicians managing first-generation (Gen 1) and early second-generation (Gen 2) hardware that hasn't been upgraded to the newest firmware. Radiotronics UK Core Capabilities & Use Cases Radio Configuration:
Program, clone, and manage codeplugs for digital and analog MOTOTRBO subscribers and repeaters. Legacy Hardware Support: It is the primary software for older radios like the XPR 6000 series DP3000/DM3000 Firmware Management: Used to update radio firmware up to version R02.09.00.0000 for high-tier radios and R01.01.30.0000 for lower-tier units. Advanced Features:
Supports configuring advanced options such as Bluetooth, GPS, audio noise suppression, and encryption. North Georgia Communications Compatibility & System Requirements
CPS 16.0 Build 828 was designed for the following environment: Primarily Windows 7, 8.1, or 10 (32-bit and 64-bit). If you have been using Build 828 for
Requires at least 2GB of RAM and 2GB of free hard drive space. Firmware Barrier: This version read or program radios with firmware R02.10.10.0001 or newer. Devices updated past this point must use Radiotronics UK CPS 16 vs. CPS 2.0: Key Differences
Many users prefer CPS 16.0 Build 828 over the newer CPS 2.0 for specific operational reasons: New MotoTRBO CPS 2.0 Release Tips! - Groups.io
MOTOTRBO CPS (Customer Programming Software) v16 Build 828 is a Windows application used to program Motorola MOTOTRBO digital two-way radios (DMR). It reads/writes radio configuration (channels, zones, contacts, digital/analog settings, encryption keys, RX/TX profiles, firmware compatibility, etc.) and is intended for fleet administrators and radio technicians.
Unlike Motorola’s newer CPS 2.0 with Subscription (which requires an annual entitlement), CPS 16 Build 828 typically uses a perpetual license file (.lic). Once activated, it does not "phone home" for renewal, making it ideal for offline programming depots.
Before jumping into technical specifics, it is crucial to understand what this software represents. Motorola Solutions continuously releases CPS updates to add features, patch security vulnerabilities, and support new hardware.
CPS 16 refers to the major version of the software designed for the second generation (Gen 2) of MOTOTRBO radios, including the XPR 7000e, XPR 5000e, SL300e, and SL7000e series. Build 828 is a specific incremental update within the CPS 16 lifecycle. It sits between earlier builds (like Build 755) and later releases (Build 910 or CPS 2.0). MOTOTRBO CPS (Customer Programming Software) v16 Build 828
Build 828 refined the equalizer settings for the XPR 7000e series, allowing technicians to adjust the Audio Tuning tab with greater precision. This solved a common complaint of "tinny" audio on early Gen 2 radios.
This is the most debated topic among radio professionals. Here is an objective comparison:
| Feature | CPS 16 Build 828 | CPS 2.0 (Latest Build) | | :--- | :--- | :--- | | License Model | Perpetual (.lic file) | Subscription (Annual) | | Offline Use | Full functionality | Requires internet every 30 days | | Gen 1 Radio Support | Limited (late models only) | None | | User Interface | Classic "Tree View" | Modern Ribbon UI | | Programming Speed | Fast (direct USB write) | Slower (encrypted packaging) | | Radio Firmware Write | Native | Requires "Firmware Assistant" tool | | Analytics | None | Built-in telemetry to Motorola |
Verdict: Stick with Build 828 if you manage a fleet of pre-2022 radios or need to program in remote locations without internet. Switch to CPS 2.0 only if you use brand-new XPR 8000e series radios or require cloud-based Radio Management.
Many users ask: "Why not just use the latest CPS 2.0?" The answer lies in hardware compatibility and institutional trust.