Mastering the Nako NA-613D: How to Disable Your Alarm If you own a Nako NA-613D digital clock—popular as a compact dashboard or desk accessory—you might find its interface a bit puzzling. Whether the daily beep is driving you crazy or you just need a quiet weekend, disabling the alarm is a straightforward process once you know the right button combination. Quick Step: How to Disable the Alarm
In the normal time display mode, press and hold the S (LAP) and D (START) buttons simultaneously.
To Deactivate: When the alarm is active, you will see a small bell icon on the display. Pressing both buttons together will make this icon disappear, signifying the alarm is disabled.
To Activate: Pressing the same combination again will bring the bell icon back, re-enabling the daily alarm. Understanding the Buttons
The Nako NA-613D typically features three main buttons that control all its functions:
M (Mode): Cycles through different functions like the stopwatch, alarm settings, and time adjustment.
S (Lap/Set): Primarily used to view the current alarm time or select specific digits (hours/minutes) during setup.
D (Start/Date): Used to view the date or increase numerical values during settings. Managing the Hourly Chime
Does your clock beep every single hour? This is a separate function from the daily alarm.
Disable/Enable Hourly Chime: While in the normal time mode, press and hold the S (LAP) and M (MODE) buttons simultaneously.
Visual Indicator: When enabled, all seven days of the week indicators (typically at the top of the screen) will often flash or remain visible. Setting a New Alarm Time
If you want to change the alarm time rather than just turning it off: Press M (Mode) twice to enter the Alarm Setting Mode.
Press S (Lap) to select between the hour and minute digits (the selected value will flash).
Press D (Start) to advance the numbers to your desired time.
Press M (Mode) once more to save and return to the normal time display. Troubleshooting Common Issues
The alarm still rings: Check the display for the bell icon. If it is still visible, the alarm is active. Ensure you are pressing S and D at the exact same time.
Display is blank/faded: These clocks use a small G10/LR54 battery . If the buttons aren't responding or the sound is weak, it may be time for a replacement.
Stuck in Stopwatch: If your clock shows "00:00:00," you accidentally entered the stopwatch. Press M (Mode) once to return to the standard time.
For more details on specific setups, retailers like Amazon.in and Made-in-China often provide digital versions of the product specifications.
Na-613D Quartz Clock for Kitchen Timer Car Desk Carriage Clock nako na-613d disable alarm
I’m unable to generate a technical or investigative report on the specific phrase “nako na-613d disable alarm” because it does not correspond to any known standard product, system, software, or widely documented process.
Here’s why, and what you can do instead:
Send the following SMS to the SIM card number installed in the Nako NA-613D:
Important: The tracker will reply via SMS confirming the action. If you don’t receive a reply, check the SIM balance or signal strength.
I can provide a template for a standard alarm disable report. You would fill in the correct model details.
Example template:
Report: Alarm Disable Procedure
System: [Insert actual make/model]
Date: [Insert date]
Authorized by: [Name]Reason for disabling: Maintenance / authorized removal / troubleshooting
Steps taken:
Outcome: Alarm successfully disabled without triggering false alerts.
Sign-off: [Technician signature]
If you can provide the correct make and model of the alarm system, or clarify where you saw “nako na-613d” (e.g., on a vehicle, gate motor, UPS, industrial panel), I can help you write a proper, safe, and accurate report.
Disabling the alarm on the Nako NA-613D is straightforward once you know the correct SMS commands or app settings. For most users, sending 123456 alarm off via SMS will instantly silence excessive beeping while retaining GPS functionality. If that fails, escalate to the configuration tool or hardware modification—but always weigh the security trade-off.
Remember: A silenced alarm should not mean a disabled tracker. Keep critical alerts like SOS and low battery active in SMS form for safety.
Have questions about your Nako NA-613D? Leave a comment below or consult your device manual. Always test alarms in a safe environment before relying on them for security.
Master Your Morning: How to Disable the Alarm on Your Nako NA-613D Go to product viewer dialog for this item. Whether you've just installed a Nako NA-613D
in your car or have one sitting on your desk, its loud morning chirp can eventually overstay its welcome. While these mini digital clocks are incredibly reliable, their multi-button interface can be a bit of a puzzle if you don’t have the manual handy.
Here is the quick guide to silencing that alarm and regaining control over your clock. The Quick Fix: Turning Off the Alarm Most Nako digital clocks, including the
, follow a standard "two-button" combination to toggle the alarm status. Mastering the Nako NA-613D: How to Disable Your
Locate your buttons: You will typically see three main buttons: MODE, START/DATE, and LAP/RESET.
The Shortcut: From the normal time-display screen, press and hold the START and RESET buttons simultaneously.
Check the Icon: Look for a small bell icon or a set of signal bars (representing the alarm/chime) on the display. If the icon disappears, the alarm is now disabled. If the icon appears, the alarm is active.
Listen for the Beep: Often, the clock will give a short double-beep to confirm you’ve toggled the setting successfully. Disabling the Hourly Chime
If your clock is beeping every hour on the dot, you're dealing with the "Hourly Chime" rather than a set alarm. To disable this: Press and hold the RESET button. While holding RESET, press the MODE button.
All days of the week (usually displayed at the top) will either appear or disappear. When they are not visible, the hourly chime is off. When the Alarm is Already Ringing If you’re currently being blasted by the alarm sound:
To Snooze: Press the START button. This usually gives you a 5-minute reprieve before it rings again.
To Stop Completely: Press the RESET button. This kills the current alarm until the next scheduled time. Troubleshooting Common Issues
The Alarm Keeps Coming Back: Ensure you aren't just hitting snooze. You must use the button combination mentioned in the "Quick Fix" section above to disable it permanently.
The Screen is Fading: If the alarm sounds weak or the icons are flickering when you try to change settings, it’s likely time for a battery swap (typically a standard LR1130 or CR2032 button cell).
By mastering these simple button combinations, you can ensure your Nako NA-613D only alerts you when you actually want it to!
To disable the alarm on a Nako NA-613D Go to product viewer dialog for this item.
digital clock, you typically use a combination of the "S" and "D" buttons while in the normal time-display mode. This compact device is widely used as a car dashboard clock or kitchen timer and is available at retailers like Meesho and Amazon India. Quick Method to Disable the Alarm
If you are in the normal mode (the screen showing the current hour, minute, second, and day of the week), follow these steps to toggle the alarm off:
Press and hold the "S" button. While holding it, the current alarm time will be displayed. Simultaneously press the "D" button.
Check the display icon. Look for a small bell or "ALM" icon on the screen. If the icon disappears, the alarm is disabled. If it reappears, it is enabled. Managing the Hourly Chime
Often, users mistakenly believe the alarm is on when they actually hear an hourly beep. To disable the hourly chime: Press and hold the "S" button. Simultaneously press the "M" button.
Observe the week indicator. Usually, if all the week icons (MON–SUN) appear or disappear, it indicates the hourly chime has been toggled. Setting or Changing the Alarm Time
If you need to adjust the alarm before turning it off, use the mode button to navigate: Enter Alarm Mode: Press the "M" (Mode) button two times. Send the following SMS to the SIM card
Select Digits: Press the "S" button to toggle between flashing hour and minute digits.
Adjust Values: Press the "D" button to increase the flashing numbers to your desired time.
Save and Exit: Press the "M" button once more to return to the normal time display. Troubleshooting Common Issues
The alarm still rings: Ensure the alarm icon is completely gone from the LCD. Sometimes the "ALM" text is very small and easy to miss. Buttons aren't responding : Check the battery. The
typically uses a single button cell or AAA battery depending on the specific sub-model variant.
Screen is faint: This device is not waterproof; moisture or low battery life can cause the display to fade or the alarm to malfunction. Nako NA-613D Plastic Quartz Clock for Car (Black, Small)
This report outlines the procedure to disable the alarm on the Nako NA-613D digital car clock/timer, based on standard operational procedures for this model. Nako NA-613D Alarm Management Report 1. How to Disable/Turn Off the Alarm To permanently turn off the alarm on the Nako NA-613D:
Press the "MODE" button until you are in the alarm setting mode.
While the alarm time is flashing, press the "SET" (or ADJ) button to toggle the alarm indicator (usually a bell or "AL" icon) off.
Ensure the "Alarm" icon is no longer visible on the LCD display. 2. Temporary Snooze If the alarm is ringing:
Press the "SNOOZE/LIGHT" button (top button) to temporarily silence it. The alarm will ring again in a few minutes. 3. Stop Alarm Permanently (While Ringing)
If the alarm is currently ringing, press any button other than SNOOZE to stop it completely. 4. Additional Device Functionality The Nako NA-613D features: 12/24 hour format selection.
Built-in stopwatch for measuring time, useful for car maintenance. Calendar display.
If you are still having trouble disabling the alarm, could you tell me: Are you seeing a bell icon on the display right now?
Is it the hourly chime (beep every hour) you are trying to turn off, rather than the wake-up alarm? Nako NA-613D инструкция часов
The Nako NA-613D is compatible with several GPS tracking platforms (e.g., GpsGate, Gurtam, or a custom white-label app). Here’s how to disable alarms through the official Nako app or common OBD/GPS apps:
The app method is user-friendly but requires an active data connection. This disables push notifications but may not silence the internal buzzer (physical beep) on the device itself.
Most users don't realize there is a hidden combination to toggle the sound on and off. You do not need to navigate through complex menus to find a "Sound" setting.
To turn the alarm OFF (Silent Mode):
To turn the alarm ON (Sound Mode):
Simply repeat the same process. Pressing CLOCK + R acts as a toggle switch. If the sound was off, it will turn back on.
How to verify it worked: Try pressing the
TIMERorMANUALbuttons. If you do not hear a "beep" with each button press, the alarm has been successfully disabled.