Nalco Ultimer 7752 Msds New | Hot & Direct

Using an outdated MSDS (pre-2015 or pre-GHS) is a regulatory violation under OSHA's Hazard Communication Standard (29 CFR 1910.1200) in the US, and under CLP Regulation (EC) No 1272/2008 in Europe.

NALCO ULTRIMER 7752 is a specialized, high-molecular-weight cationic organic flocculant, commonly used in industrial wastewater treatment, oil sands extraction, and mineral processing. It is typically supplied as a viscous liquid emulsion. With evolving global regulations (specifically GHS Revision 7, 8, or 9), the new Material Safety Data Sheet (MSDS) — now formally called the Safety Data Sheet (SDS) — has been updated to provide clearer hazard communication, first-aid measures, and environmental precautions.

Introduction
Nalco Ultimer 7752 is a chemical product used in industrial water treatment and process-control applications. Understanding its Material Safety Data Sheet (MSDS) — now commonly called Safety Data Sheet (SDS) — is essential for safe handling, regulatory compliance, and emergency response. This essay summarizes key SDS sections for Nalco Ultimer 7752, discusses likely hazards, recommended precautions, and outlines best practices for workplace safety and environmental protection.

Composition and Product Identity
Nalco Ultimer 7752 is a proprietary formulation produced by Nalco (an industry supplier of water-treatment chemicals). As a trade product, the SDS provides a balance between identifying hazardous components and protecting confidential business information. Typical SDS entries include product identifiers, manufacturer contact details, recommended uses (e.g., corrosion inhibition, scale control), and emergency phone numbers.

Hazard Identification
The SDS classifies physical, health, and environmental hazards. Common hazard categories for industrial water-treatment products include:

Signal words (e.g., Danger/Warning), hazard pictograms (GHS), and hazard statements communicate the risks. Specific hazard statements for Ultimer 7752 would depend on its active chemistries; for instance, certain polymers, biocides, or dispersants may be irritants or aquatic toxicants.

Composition / Ingredients
An SDS lists hazardous components with concentration ranges and CAS numbers when disclosure is required. Proprietary blends sometimes redact exact concentrations but still indicate hazard categories. Likely components in water-treatment polymers can include organic polymers, amine-based dispersants, or small amounts of biocidal agents.

First-Aid Measures
Key first-aid measures typically include:

Fire-Fighting Measures
Many water-treatment formulations are non-flammable, but SDSs include suitable extinguishing media, potential combustion products (e.g., oxides of carbon, nitrogen), and firefighter protective equipment (SCBA, protective clothing).

Accidental Release Measures
Contain and collect spills using inert absorbents, ventilate the area, and prevent entry into waterways. Use appropriate PPE and dispose of waste following local regulations.

Handling and Storage
Recommendations include storing in a cool, well-ventilated area, away from incompatible materials (strong oxidizers, acids, or bases as applicable), keeping containers closed, and using engineering controls to minimize aerosol formation.

Exposure Controls / Personal Protection
SDS guidance typically specifies:

Physical and Chemical Properties
An SDS provides properties such as appearance, odor, pH, solubility, flash point (if applicable), and relative density. Ultimer 7752 is likely a liquid, water-soluble product with low volatility.

Stability and Reactivity
Information on chemical stability, conditions to avoid (extreme temperatures, contamination), and hazardous decomposition products helps prevent dangerous reactions.

Toxicological and Ecological Information
The toxicology section summarizes acute and chronic effects, routes of exposure, and any carcinogenicity data available. The ecological section assesses toxicity to aquatic organisms and persistence/degradability; many treatment chemicals are harmful to aquatic life and require containment.

Disposal Considerations and Transport Information
SDSs include instructions for waste disposal and relevant transport classifications (DOT/IMDG/IATA). Disposal should comply with local, regional, and national regulations; contaminated packaging may require special handling.

Regulatory Information
Applicable regulations (e.g., OSHA, EPA, EU REACH) and hazard classification statuses are summarized to help users meet compliance obligations.

Best Practices and Recommendations

Conclusion
While the precise hazards and handling requirements for Nalco Ultimer 7752 depend on its exact formulation, the product's SDS is the authoritative source for safe use and regulatory compliance. Employers and users should consult the current SDS provided by the manufacturer, implement recommended controls, and maintain training and emergency plans to minimize health and environmental risks.

Related search suggestions (useful terms): Nalco Ultimer 7752 SDS, Nalco Ultimer 7752 safety data sheet, Ultimer 7752 MSDS, water treatment polymer SDS, industrial water treatment chemical SDS.

Nalco Ultimer 7752 is a specialized water-based polymer technology developed by Nalco Water (an Ecolab company) primarily for industrial wastewater treatment. Unlike traditional emulsion flocculants, it is part of the Ultimer product line, which is designed to be solvent-free and environmentally friendly.

The following article provides a detailed overview of the product based on the latest Safety Data Sheet (SDS) information. Product Overview and Application

Ultimer 7752 is a cationic dispersion flocculant. It is widely used in primary wastewater treatment to enhance the removal of suspended solids. Common applications include:

Wet Gas Scrubbers: Improving solids capture efficiency in refinery operations.

Oily Wastewater: Maintaining performance in highly variable or oily industrial streams. nalco ultimer 7752 msds new

Water Reuse: Enabling the recycling of process water by ensuring consistent effluent quality. Physical and Chemical Properties

According to technical specifications, Ultimer 7752 has the following characteristics: Appearance: White liquid. Odour: Slight chlorine-like scent. pH Level: 3.0 – 4.1 (100% concentration). Boiling Point: Approximately 100°C.

Flash Point: > 93.3°C (Pensky-Martens closed cup method), indicating it is not classified as flammable under standard conditions. Solubility: Dispersible in water. Safety and Hazards Information

While Ultimer technology is designed to reduce the use of hazardous hydrocarbon solvents, it still requires careful handling. Based on common SDS classifications for this product group:

Potential Health Effects: May cause mild skin and eye irritation upon direct contact. Inhalation of mists or vapors may irritate the respiratory tract.

Environmental Impact: While the product itself aims for sustainability, concentrated spills can be toxic to aquatic life. For example, similar formulations show toxicity to rainbow trout (LC50 values).

Firefighting: The product is not flammable, but if involved in a fire, decomposition can release carbon oxides, nitrogen oxides, and hydrogen chloride. Use dry chemical, foam, or water spray for surrounding fires. Handling, Storage, and First Aid

Proper industrial hygiene is essential when working with Nalco chemicals. ULTIMER Polymer Technology | Ecolab

Nalco ULTIMER® 7752 is a water-based polymer technology used primarily for wastewater management and water clarification . According to the Safety Data Sheet (SDS), it is generally not classified as a hazardous substance under normal use. 1. Product Identification & Properties Product Name: ULTIMER® 7752 Physical Form: White liquid Chlorine-like Flash Point: > 93.3°C (Non-flammable/Non-combustible) 3.0 – 4.1 (at 100%, 25°C) Freezing Point: Pour point of -5°C www.farnese.co.nz 2. Safety & Handling Precautions

While not classified as hazardous, standard industrial hygiene is required: Eye & Skin Protection:

Wear safety glasses and protective clothing. Although health injuries are not expected, it is best to avoid direct contact.

Wash face and hands thoroughly after handling. Remove and wash any contaminated clothing before reuse. Slippage Hazard:

Like many polymers, this product may become extremely slippery when wet. Ensure surfaces are washed thoroughly if spilled. 3. First Aid Measures

If exposure occurs, follow these steps and seek medical advice if symptoms persist: Rinse immediately with plenty of water. Wash off with soap and plenty of water. Ingestion: Rinse mouth. Do induce vomiting unless directed by medical personnel. Inhalation:

Move to fresh air; seek medical attention if symptoms develop. 4. Firefighting & Spill Control Extinguishing Media:

Use media appropriate for the surrounding environment (e.g., dry chemical, foam, or water spray).

Stop the leak if safe. Contain with non-combustible absorbent material (sand or earth) and place in a labeled container for disposal. Do not allow the product to reach soil or waterways. Hazardous Combustion:

May release carbon, nitrogen, and sulfur oxides, or hydrogen chloride under fire conditions. 5. Storage & Disposal

Keep containers tightly closed in a dry, well-ventilated area. Protect from frost and extreme temperatures to prevent viscosity changes or pumping issues.

Dispose of fire residues and contaminated water in accordance with local and national regulations.

For the most current or site-specific version, you can request an official SDS directly through the Ecolab SDS portal in oily wastewater or specific pumping requirements for low temperatures? ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd

This write-up summarizes the safety and handling profile for ULTIMER® 7752, a water-soluble polymer technology from Nalco Water (Ecolab).  Product Identification  Name: ULTIMER® 7752

Type: Water-soluble polymer used primarily for solids capture efficiency in wastewater treatment.

Application: Designed to replace latex flocculants, reducing overall solids and hazardous sludge.  Hazard Identification & Safety Profile  Using an outdated MSDS (pre-2015 or pre-GHS) is

Under normal use, this product is generally considered low-hazard. 

Health Effects: No known or expected health injuries for eyes, skin, ingestion, or inhalation.

Chronic Exposure: No known symptoms or health injuries expected over time.

Physical Hazard: The product becomes extremely slippery when wet. Surfaces should be washed thoroughly until all traces are removed.  Toxicity Data  Acute Oral Toxicity: Estimated to be > 2,000 mg/kg.

Carcinogenicity: No components are listed at levels greater than or equal to 0.1% as hazardous carcinogens.  Handling and Storage 

Storage: Protect from frost; freezing does not impair the product if properly reconstituted. Keep containers closed when not in use.

Ventilation: Use with adequate ventilation to ensure safety.

Precautions: Avoid contact with eyes, skin, and clothing. Do not take internally.  Emergency and First Aid 

Spills: For small spills, contain with absorbent material like clay or soil. Nalco POLYCLEAN 7 is recommended for effective cleanup.

Eye/Skin Contact: Though symptoms are not expected, it is standard practice to rinse affected areas and have emergency equipment readily available. 

For the most up-to-date and complete safety profile, refer to the official Ecolab/Nalco SDS search using the product name or code.  ULTIMER® 7752 Safety Data Sheet | PDF | Toxicity - Scribd

ULTIMER® 7752 Safety Data Sheet (SDS) confirms that this product is a water-soluble polymer used primarily for wastewater treatment and solids capture. Key Product Characteristics Physical State : Liquid dispersion. Solids Capture Efficiency

: Technology in the ULTIMER line is noted for increasing solids capture efficiency, potentially from ~92% to in refinery applications. Environmental Distribution

: If released, the material is expected to distribute primarily into soil (50–70%) water (30–50%) , with less than 5% entering the air. Bioaccumulation

: No bioaccumulation occurs because the large size of the polymer prevents it from crossing cellular membranes. Safety & Handling Spill Hazard : Like other ULTIMER products, 7752 becomes extremely slippery

when wet. Spills should be contained with absorbent material like clay or soil. Health Hazards

: Avoid contact with eyes and skin. Ensure adequate ventilation and keep containers closed when not in use.

: Protect the product from frost. While freezing may not permanently impair the product, it must be properly reconstituted before use. Accessing the Full SDS Nalco Water (an Ecolab company) typically does

provide all Safety Data Sheets for public download. To obtain the most recent version of the SDS for your specific region, you should: Ecolab SDS Search tool to look up the product by name or code. If it is not available online, submit a request via the Nalco Water SDS Request Form Nalco Water customer service in a specific country to expedite your SDS request? ULTIMER Polymer Technology | Ecolab

ULTIMER® 7752 is a water-based polymer technology developed by Nalco Water (an Ecolab company) primarily used for wastewater treatment. According to recent Safety Data Sheet (SDS) documentation, this product is generally classified as non-hazardous under normal use conditions. Key Safety Information

Based on the standard 16-section SDS format, here is the essential safety profile for ULTIMER 7752:

Hazard Classification: It is typically not classified as a hazardous substance or mixture.

Health Effects: No known or expected health injuries are reported for eye contact, skin contact, ingestion, or inhalation under normal use.

Toxicity: The acute oral toxicity is estimated at > 2,000 mg/kg. Signal words (e

Transportation: This product is generally not regulated as a dangerous good for transport. Environmental & Operational Benefits

Unlike traditional latex or emulsion flocculants, ULTIMER technology offers several sustainable advantages:

Water-Based Composition: It does not use hydrocarbon solvents or surfactants, making it a more environmentally friendly "green" chemistry.

Efficiency: It can increase solids capture efficiency (e.g., from 92% to 98%), resulting in less hazardous sludge in wastewater plants.

Ease of Use: It does not require specialized polymer make-down equipment or long activation times. How to Access the Official SDS

Because Safety Data Sheets are updated periodically, you should always reference the most current version directly from the manufacturer: Search by product name or code on the Ecolab SDS portal.

In the event of an emergency or spill, use the local emergency contact numbers listed on the first page of the specific SDS for your region. ULTIMER™ Polymer Technology - Ecolab

The safety and technical profile of Nalco ULTIMER 7752 is characterized by its low-hazard profile and use in industrial water treatment. Official Safety Data Sheets (SDS) for Nalco Water products are generally not available for direct public download and must be requested through the Ecolab SDS Request Form. Key SDS Profile: ULTIMER 7752