| Feature Category | Specific Features & Capabilities |
|----------------|----------------------------------|
| Device Identification | - Recognizes Nokia RM-1187 hardware ID (VID_0E8D & specific PID)
- Enables "MediaTek USB Port" in Windows Device Manager |
| Connectivity Modes | 1. MTP (Media Transfer Protocol) – Transfer photos, music, videos, and documents to/from PC
2. PTP (Picture Transfer Protocol) – For digital camera-like image transfer
3. ADB (Android Debug Bridge) – For developers (if device runs Android)
4. USB Tethering – Share PC internet with phone or vice versa |
| Flashing & Firmware | - Download Agent (DA) support for flashing stock ROM/firmware using SP Flash Tool
- Preloader & Bootrom detection for unbricking dead devices
- Format & Write operations on NAND/eMMC storage |
| Diagnostic & Repair | - Meta Mode connection – For IMEI repair, RF calibration, and NVRAM backup/restore
- Brom Mode (Boot ROM) – Low-level access for advanced unbricking
- Logging & Debug – Captures kernel logs and modem logs for engineers |
| Data Management | - USB Mass Storage (if available) – Use phone as a flash drive
- Backup/restore of NVRAM, userdata, and firmware partitions via SP Flash Tool |
| Compatibility | - Windows OS: XP, Vista, 7, 8, 8.1, 10, 11 (32-bit & 64-bit)
- Driver Type: Signed/unsigned (disable signature enforcement on Win 10/11 for preloader mode)
- Auto-installer or manual INF file installation |
| Advanced (Developer/Service) | - Supports AT commands via virtual COM port
- Enables network unlocking (using tools like Maui META or SN Writer)
- Firmware upgrade without removing battery (if supported by device) |
If you are trying to connect your Nokia feature phone to a computer for flashing, unlocking, or data transfer and are facing connectivity issues, you likely need the Nokia RM-1187 USB Driver.
Specifically, the RM-1187 (commonly known as the Nokia 130 or Nokia 130 Dual SIM 2017 edition) runs on a MediaTek (MTK) chipset. This guide will walk you through downloading the correct MTK driver and installing it on your Windows PC.
The Nokia RM-1187 corresponds to the Nokia 3 model. Since this device utilizes a MediaTek (MTK) processor (specifically the MT6737 chipset), it requires specific MTK Drivers to communicate with a Windows computer.
Without these drivers, if you connect your phone to a PC, it might charge but will not be recognized by flashing tools (like SP Flash Tool) or MTP (Media Transfer Protocol) for file transfers.
The Nokia RM-1187 is a classic entry-level feature phone, known for its durability and long battery life. While not a smartphone, this device still requires proper computer connectivity for tasks like firmware updates, data transfer, and troubleshooting. At the heart of this connectivity lies the MediaTek (MTK) USB driver.
Many users searching for the "Nokia RM-1187 USB driver MTK" are either attempting to flash new firmware (to unbrick the phone or change language packs) or trying to resolve a "USB device not recognized" error in Windows. Unlike modern Android phones that use MTP or ADB drivers, the Nokia RM-1187 relies on a proprietary MTK USB VCOM driver to communicate with PC-based flashing tools like SP Flash Tool or SN Write Tool.
In this article, we will explain exactly what the Nokia RM-1187 USB driver MTK is, why you need it, where to download a safe version, and how to install it correctly on Windows 11, 10, 8, and 7.
Which would you like next?
To connect your Nokia 216 (RM-1187) to a PC for flashing or software repair, you need specialized MediaTek (MTK) USB Drivers. These drivers allow tools like Infinity-Best or other flashing software to communicate with the phone's MTK chipset. 1. Preparation for Installation
On modern versions of Windows (10 and 11), you must disable Driver Signature Enforcement before installing these drivers, as they are often not digitally signed. Hold the Shift key and click Restart.
Go to Troubleshoot > Advanced options > Startup Settings > Restart. Press 7 or F7 to "Disable driver signature enforcement". 2. Recommended Driver Sources
Since there is no longer an official Nokia driver portal, you can find the necessary files on reputable third-party driver sites:
MTK-Driver-Setup: A universal installer for MediaTek devices available at MTKDriver.com.
Nokia Connectivity Cable Drivers: Essential for general connectivity, available on sites like Uptodown or DriverScape.
Hardware-Specific Drivers: You can search for the specific hardware ID USB\VID_0421&PID_06FB to find matching drivers on DriverIdentifier. 3. Manual Installation Steps
If the automatic setup fails, follow these steps to install the driver manually via Device Manager:
Open Device Manager: Right-click the Start button and select Device Manager. nokia rm 1187 usb driver mtk
Add Legacy Hardware: Click your PC name at the top, go to Action > Add legacy hardware.
Manual Selection: Choose "Install the hardware that I manually select from a list (Advanced)" and click Next. Select Port: Choose Ports (COM & LPT) from the list.
Have Disk: Click Have Disk..., then Browse to the folder where you extracted the downloaded MTK drivers. Select the .inf file (often named usbser.inf or mtk_vcom.inf).
Confirm: Ignore any security warnings and proceed with the installation. 4. Verification
Once installed, connect your Nokia 216 while it is powered off. The Device Manager should briefly show a "MediaTek USB Port" or "MTK USB VCOM" entry under the Ports (COM & LPT) section before the phone starts charging.
Are you planning to flash the firmware or simply transfer files with this driver?
Nokia MTK Drivers Windows 10 64Bit Installation Guide #nokia
Nokia RM-1187 (marketed as the Nokia 216) utilizes a MediaTek (MTK)
chipset, requiring specific USB drivers to establish a communication bridge between the device and a PC for tasks like firmware flashing, IMEI repair, or data transfer Essential Driver Overview
For the Nokia RM-1187, you typically need two types of drivers depending on your goal: MTK VCOM/CDC Drivers
: Critical for flashing stock firmware or custom ROMs using tools like SP Flash Tool Infinity BEST Nokia USB Serial Port Drivers
: Required for general connectivity and "Read Info" operations in diagnostic software.
Critical Installation Step: Disabling Driver Signature Enforcement
Most modern Nokia MTK drivers are not digitally signed for Windows 10 or 11. To install them successfully, you disable driver signature enforcement: key and select from the Power menu. Navigate to Troubleshoot Advanced options Startup Settings to "Disable driver signature enforcement." Manual Installation via Device Manager
If your device appears as an "Unknown Device" after connecting via USB, follow these steps to force the driver installation: Open Device Manager : Right-click the Start button and select Device Manager Update Driver : Right-click the unknown device and choose Update driver Browse my computer for drivers Pick from List Let me pick from a list of available drivers on my computer Select Category Ports (COM & LPT) Mobile Devices
The Nokia RM-1187, also known as the Nokia 216 Dual SIM, is a MediaTek-based (MTK) feature phone. Connecting it to a PC for flashing or software repair requires specific MTK USB drivers, which differ from standard data transfer drivers. Driver Specifications
The drivers are essential for Windows to recognize the device when it is in "Flash Mode" or "Preloader Mode". Manufacturer: MediaTek (MTK). | Feature Category | Specific Features & Capabilities
Primary Function: Flashing firmware, unlocking, or repairing device software. Supported OS: Windows 7, 8, 8.1, and 10 (32-bit & 64-bit).
Driver Types: MediaTek USB VCOM, Preloader USB, and Nokia USB Serial Port. Installation Guide for Windows 10/11
Modern Windows versions require disabling Driver Signature Enforcement to install these unsigned legacy drivers. Nokia 216 Dual Sim (RM-1187) - DeviceAtlas Nokia 216 Dual Sim (RM-1187) | DeviceAtlas. DeviceAtlas
Nokia MTK Drivers Windows 10 64Bit Installation Guide #nokia
The Nokia RM-1187 Go to product viewer dialog for this item.
, better known as the Nokia 216 Dual SIM, is a reliable feature phone that continues to be a staple for many users due to its simplicity and battery life. However, to maintain or repair this device using a computer—whether for data transfer or advanced firmware tasks—the MTK USB driver is a critical component that acts as the essential bridge between the phone's hardware and the Windows operating system. The Role of MTK USB Drivers Because the Nokia RM-1187
is powered by a MediaTek (MTK) chipset, standard generic drivers are often insufficient for professional-level tasks. These specialized drivers allow a PC to recognize the device even in its "preloader" or "meta" modes, which are necessary for deep system interactions. Without the correct MTK driver, a computer may identify the connected phone as an "unknown device," rendering it inaccessible to servicing tools. Primary Uses for the Driver
Firmware Flashing: Technicians use these drivers to connect the device to tools like the MediaTek Flash Tool or "Infinity Best" software to install stock firmware (ROM). This is often the only way to fix software glitches, boot loops, or to reset a forgotten security code.
IMEI Repair & Management: The drivers facilitate connections to IMEI tools, allowing for the restoration of original identity numbers if they become corrupted during software updates.
Data Synchronization: While some versions of Windows can handle basic MTP (Media Transfer Protocol) for moving photos or contacts, the MTK-specific drivers ensure a stable and faster connection for more complex data management. Installation and Troubleshooting Nokia 216 Dual SIM Mobile Phone User Manual (RM-1187)
The Nokia 216 (RM-1187) is a feature phone that requires specific MediaTek (MTK) USB drivers to connect with a PC for tasks like flashing firmware or unlocking security codes. Because this device uses a MediaTek chipset, standard Nokia drivers may not always be sufficient; you often need the MTK USB VCOM or Preloader drivers. Why You Need MTK Drivers
The RM-1187 relies on these drivers for the computer to recognize the phone in various states:
MediaTek USB VCOM: Used for firmware flashing with tools like Miracle Box or Infinity-Box.
Nokia USB Serial Port: Required for general data transfer and modem functionality.
Preloader Mode: Critical for "dead boot" repairs where the phone won't turn on normally. Supported Operating Systems
These drivers are generally compatible with the following Windows versions: Windows 7 (32-bit and 64-bit) Windows 8 / 8.1
Windows 10 / 11 (May require disabling Driver Signature Enforcement) How to Install the Driver Manually The Nokia RM-1187 is a classic entry-level feature
Since official driver support from Nokia is limited, manual installation is often the most reliable method:
Finding the correct Nokia RM 1187 USB driver is the first step toward managing your device via PC, whether you are looking to flash firmware, transfer files, or repair software issues. Because the Nokia 150 (RM-1187) is built on a MediaTek (MTK) chipset, you need specific connectivity drivers to ensure your computer recognizes the hardware in "Boot Mode" or "VCOM Mode." Why You Need the MTK USB Driver for Nokia RM-1187
The Nokia 150 RM-1187 does not connect like a modern smartphone. To perform advanced tasks, your PC needs to communicate directly with the MediaTek processor. The MTK USB driver acts as a bridge, allowing tools like Nokia Software Recovery Tool, Miracle Box, or MTK Flash Tool to "see" the phone when it is plugged in via USB. Common reasons for installation include: Fixing a "Phone Not Recognized" error. Flashing original stock firmware to unbrick the device. Removing a forgotten security code or PIN. Updating the device software manually. Essential Technical Specifications Device Model: Nokia 150 (RM-1187) Chipset: MediaTek (MTK) Driver Type: VCOM / Preloader / CDC Supported OS: Windows 7, 8, 10, and 11 (32-bit and 64-bit) How to Download and Install Nokia RM-1187 USB Drivers
To ensure a stable connection, follow these steps to install the MTK drivers manually on your Windows PC. 1. Download the Driver Package
Search for a "MediaTek All-in-One USB Driver" or "Nokia MTK Driver" package. These usually come in a ZIP or RAR format. Extract the contents to a folder on your desktop. 2. Disable Driver Signature Enforcement (Windows 10/11)
Windows often blocks unsigned MTK drivers. Before installing: Go to Settings > Update & Security > Recovery. Under Advanced Startup, click Restart Now.
Select Troubleshoot > Advanced Options > Startup Settings > Restart. Press 7 or F7 to "Disable driver signature enforcement." 3. Manual Installation via Device Manager Open Device Manager on your PC.
Click on your computer name at the top, then go to Action > Add legacy hardware.
Select Install the hardware that I manually select from a list (Advanced). Choose Show All Devices and click Next.
Click Have Disk and browse to the folder where you extracted the drivers. Select the .inf file (often named usbvcom.inf).
Select the MediaTek DA USB VCOM Port and finish the installation. Troubleshooting Connection Issues
If your Nokia RM-1187 is still not detected after installation, check the following:
Check the USB Cable: Feature phones like the Nokia 150 are sensitive to cable quality. Use a high-quality data cable, not just a charging cable.
Use USB 2.0 Ports: MTK VCOM drivers sometimes struggle with USB 3.0 (blue) ports. Try a USB 2.0 port on the back of your PC.
Battery Status: When connecting for flashing, you often need to power the phone off, remove the battery, reinsert it, and hold a "boot key" (usually the center button or '*' key) while plugging it in.
Clean the Port: Dust in the micro-USB port can prevent a solid data connection. Conclusion
Installing the Nokia RM-1187 USB driver (MTK) is a straightforward process that unlocks the ability to service your Nokia 150. By using the VCOM driver and ensuring your Windows signature settings are adjusted, you can easily flash or repair your device without hardware errors.
If you'd like to troubleshoot a specific error message you're seeing in Device Manager or a flashing tool: What is the specific error code or message? Which operating system are you using? Are you trying to flash firmware or just transfer files?