Phison Mpall V5.13.0c File
| Error | Meaning | Solution |
|--------|---------|----------|
| 0x1042 | Flash ID mismatch | Wrong IC Type or firmware. Try Auto or different series. |
| 0x1106 | Low-level format fail | Use Erase All Blocks + Low Level Format. Try different USB port (2.0). |
| 0x4023 | ISO too large | Reduce ISO size or switch to mode 2 (public only). |
| 0x1025 | Timing DLL error | Copy IDBLK_TIMING.dll from another MPALL version. |
| Red bar, no code | Driver conflict | Uninstall USB drivers in Device Manager, restart, retry. |
Do not use this tool for routine formatting. It is an "emergency surgery" tool. You need MPall v5.13.0c if you experience any of the following: Phison Mpall V5.13.0c
Warning: Using MPall on a healthy drive will erase all data permanently and may void the warranty. Do not run this tool unless you are certain the drive uses a Phison controller. Do not use this tool for routine formatting
Before starting:
MPALL v5.13.0c often includes firmware for PS2251-50/60/70. If your drive uses PS2251-03, find
FW_03.bin.