Radio Set Hx Prc 6020 Technical Data Install

To keep the HX-PRC 6020 operating to its technical specifications:

Step 1: Battery Installation

Step 2: Antenna Mounting

Step 3: Audio Accessories

Step 4: Power On & Check

Waveforms & Data:

Encryption (INFOSEC):

Audio: The audio output (1 Watt) is significantly louder than commercial handhelds, designed to cut through ambient noise in vehicles or aircraft.

Components:

Steps:

| Parameter | Specification | |-----------|----------------| | Frequency Range | VHF: 136–174 MHz
UHF: 400–470 MHz (or 350–390 MHz for some models) | | Channel Capacity | 256 channels / 16 zones | | Operating Voltage | 7.4 V DC (nominal, Li-ion battery) | | Battery Life | Approx. 12–16 hours (1500–2000 mAh, depending on version) | | RF Output Power | High: 5 W (VHF) / 4 W (UHF)
Low: 1 W | | Receiver Sensitivity | 0.25 µV (12 dB SINAD) | | Audio Output | 1 W @ 8 ohms | | IP Rating | IP67 (submersible 1 m for 30 min) | | Dimensions | ~125 × 60 × 38 mm (without antenna) | | Weight | ~320 g (with battery) | | Modulation | FM / 4FSK (digital mode if DMR variant) | | Antenna Connector | SMA-Female (or NATO-standard bayonet depending on clone version) |

---

Adjacent Channel Selectivity: ≥ 75 dB @ 25 kHz

Intermodulation Rejection: ≥ 80 dB

Blocking/Dynamic Range: ≥ 90 dB

Audio Output: 1.5W @ 8Ω (Internal speaker), 4W (External audio accessory)