Renolink 1.87 Install Windows 10 -
Genuine Renolink interfaces don’t require a crack, but 99% of units in circulation are clones.
Installing Renolink 1.87 on Windows 10 is straightforward if you pay attention to driver compatibility and administrator privileges. The key steps are:
Once set up correctly, Renolink 1.87 provides reliable diagnostics for Renault group vehicles on Windows 10.
Disclaimer: This guide is for educational purposes. Ensure you own a legitimate interface and software license where applicable.
To install Renolink 1.87 on Windows 10, you must properly configure the FTDI drivers and COM port settings to ensure the OBD2 interface communicates correctly with the software. 1. Install FTDI Drivers
Extract Files: Copy the Renolink 1.87 folder from your source (CD or download) to your desktop.
Run Driver Setup: Open the folder and run the driver installer, typically named CDM21218_Setup_720.
Complete Installation: Click Extract, then follow the prompts to install the Device FTDI Driver. 2. Install Renolink Software Run Setup: Double-click the renolink_setup87 file.
Set Directory: Choose the installation path (usually C:\Program Files\Renolink) and complete the installation.
Transfer Data Files: Copy the renolink.dat and RenOLink files from your initial source folder and paste them into the installation directory at C:\Program Files\Renolink. 3. Configure COM Port Settings
Connect Hardware: Plug your Renolink OBD2 interface into your PC's USB port.
Access Device Manager: Right-click the Start button and select Device Manager.
Modify Port: Locate "USB Serial Port" under Ports (COM & LPT). Renolink 1.87 Install Windows 10
Right-click the port and select Properties > Port Settings > Advanced.
Change the COM Port Number to COM4 (or another low number below 4 if needed for compatibility). Set the Bits per second to 115200. Set the Latency Timer (msec) to 1. 4. Launching the Software
Create Shortcut: Right-click Renolink.exe in your installation folder and select Send to > Desktop (create shortcut).
Run as Administrator: Right-click the shortcut and select Run as administrator to ensure full permissions.
For further assistance with activation or driver errors, you can refer to troubleshooting guides from Renolink.store or detailed technical walkthroughs on OBDII365 .
Installing Renolink 1.87 on Windows 10 is a straightforward process when following a specific sequence of driver setup and port configuration. This tool is widely used for Renault and Dacia diagnostics, offering dealership-level features like ECU programming and key coding. Prerequisites for Installation Before beginning, ensure you have the following: Operating System: Windows 10 (32-bit or 64-bit).
Hardware: Renolink OBD2 interface cable (typically the red USB version).
Software Files: Renolink 1.87 installation package, which usually includes renolink_setup87 and the CDM21218_SETUP_720 driver. Step-by-Step Installation Guide 1. Install the FTDI Driver
The Renolink interface requires specific FTDI drivers to communicate with your PC.
Locate and run CDM21218_SETUP_720.exe from your software folder.
Follow the on-screen prompts to complete the driver installation. This ensures your USB port can recognize the OBD2 adapter. 2. Software Installation Run the renolink_setup87.exe installer.
Choose the destination folder (standard path is usually C:\Program Files\Renolink). Genuine Renolink interfaces don’t require a crack, but
Once finished, a desktop shortcut for "RenOLink v1_87" will appear. Do not run it yet. 3. Copy Activation Files
Most versions of 1.87 require manual placement of configuration files to function.
Right-click the desktop shortcut and select Open file location.
From your source folder, copy the RenOLink.exe and renolink.dat files.
Paste these into the installation directory, replacing any existing files if prompted.
Create a new shortcut for the replaced RenOLink.exe on your desktop and delete the original installer shortcut. 4. Configure COM Port Settings
This is the most critical step for ensuring the software "sees" the vehicle. Connect your Renolink cable to a USB port on your PC.
Open Device Manager, expand Ports (COM & LPT), and find "USB Serial Port".
Right-click it, select Properties, then go to Port Settings > Advanced.
Change the COM Port Number to COM4 (though some versions work on other ports, COM4 is standard for 1.87).
Set the Latency Timer (msec) to 1 and the Bits per second to 115200. Click OK to save and restart your computer if prompted. Key Features of Renolink 1.87
Once installed, Renolink 1.87 provides access to advanced vehicle functions: Airbag Reset: Clearing crash data and virginizing modules. Once set up correctly, Renolink 1
Key Programming: Adding or deleting keys and cards for Renault/Dacia models.
ECU Programming: Reading/writing EEPROM and flash for various dashboards and engine units.
Hidden Features: Activating options like daytime running lights or auto-fold mirrors. Troubleshooting Common Issues
Installing Renolink 1.87 Windows 10 involves a few specific driver configurations and file placements to ensure the software communicates correctly with your OBD2 interface. Installation Steps Driver Installation (FTDI) Locate the CDM21218_Setup driver within your Renolink 1.87 folder. Run the setup and follow the prompts to install the FTDI Device Driver
. This is critical for the computer to recognize the OBD2 cable. Software Setup renolink_setup87 installer. Choose your destination folder (typically C:\Program Files\Renolink ) and complete the installation. File Activation renolink.dat executable from your source folder. Paste these directly into the installation directory at C:\Program Files\Renolink , overwriting any existing files if prompted. COM Port Configuration Connect your Renolink interface to your laptop's USB port. Device Manager and find the USB Serial Port under "Ports (COM & LPT)". Right-click the port -> Properties Port Settings COM Port Number (or the port specified by your software version). Change the Latency Timer (msec) to ensure stable communication with the vehicle's ECU. Key Features of v1.87 ECU Programming : Clear crash data, program keys, and read/write EEPROM. Broad Compatibility
: Works with various Renault and Dacia models, including older platforms like the Laguna and newer ones like the Captur. System Access
: Provides full diagnostics for ABS, Airbags, Transmission, and Infotainment modules.
For more detailed guidance on specific features, you can refer to the Renolink Software User Manual or check for official updates on Renolink.store Are you planning to use this for key programming clearing crash data , as the setup steps for those specific tasks can vary?
Original Renolink Software v2.14 Renault & Dacia Diagnostics
Ensure the following are installed:
Renolink is a popular diagnostic software primarily used for Renault, Dacia, and some Nissan vehicles. Version 1.87 is a widely used release that offers enhanced ECU coverage, DPF regeneration functions, injector coding, and key programming.
This guide will walk you through a successful installation of Renolink 1.87 on Windows 10 (32-bit or 64-bit) , including driver setup and common troubleshooting.