| Parameter | Specification | |-----------|----------------| | Water & Dust Ingress | IP68 (submersible up to 2m for 4 hours) | | MIL-STD-810G Compliance | Method 501.6 (High Temp), 502.6 (Low Temp), 514.7 (Vibration), 516.7 (Shock) | | Operating Temperature | -30°C to +65°C (-22°F to +149°F) | | Storage Temperature | -40°C to +85°C (-40°F to +185°F) | | Humidity | 95% RH non-condensing |
Before diving into detailed analysis, here is the essential RS HX PRC 6020 technical data in a condensed table:
| Parameter | Specification | |-----------|----------------| | Frequency Range | 1.6 MHz to 30 MHz (continuous) | | Channel Spacing | 10 Hz, 100 Hz, 1 kHz, 2.8 kHz, 3 kHz | | Mode of Operation | USB, LSB, AME, CW, FSK, ALE (2G & 3G), Data (STANAG 4539) | | RF Output Power | 20 W PEP / 20 W Average (manpack configuration); 50 W / 150 W with external amplifier | | Receiver Sensitivity | Better than 0.35 µV for 10 dB (S+N)/N at 2.8 kHz SSB | | Selectivity | 2.3 kHz / 2.8 kHz / 3 kHz (selectable) | | Frequency Stability | ±0.5 ppm (–30°C to +60°C) | | Intermodulation (3rd order) | > 80 dB | | Spurious Emissions | < –60 dB (below carrier) | | Audio Output (internal speaker) | 1 W into 8 Ω | | Power Supply | 10.5 V to 16 V DC (nominal 12 V) | | Battery Type | Lithium-Ion 14.4 V / 6.8 Ah (hot-swappable) | | Power Consumption (Rx) | < 250 mA (standby), < 1.5 A (receive with backlight) | | Power Consumption (Tx) | < 6 A at 20 W PEP | | Dimensions (HxWxD) | 85 mm x 260 mm x 290 mm (excluding protrusions) | | Weight | 4.2 kg (with battery and handset) | | Operating Temperature | –30°C to +60°C | | Storage Temperature | –40°C to +80°C | | Water/Dust Protection | IP67 (submersible up to 1 m for 30 minutes) | | MIL-STD | MIL-STD-810G (shock, vibration, humidity, salt fog) | | Data Interface | RS-232 (up to 38.4 kbps), USB, Ethernet (optional) | | Encryption | AES-256 (COTS or Type 1 via external module) | | GPS | Integrated 12-channel, cold start < 45 s |
| Parameter | Specification | |-----------|----------------| | GNSS Support | GPS L1, GLONASS L1 | | Time To First Fix (TTFF) | Cold: < 35 sec; Hot: < 3 sec | | Horizontal Accuracy | < 2.5 meters (typical) | | Tracking Sensitivity | -160 dBm | | Data Output | NMEA-0183, TAIP | rs hx prc 6020 technical data
Given the above specifications, the RS HX PRC 6020 is deployed in:
The RS HX PRC 6020 is not just another HF radio; it is a battle-tested, software-defined manpack that combines exceptional receiver sensitivity, rugged environmental sealing, and advanced data capabilities. Its technical data reveals a device designed for the modern digital battlefield, where secure, long-range HF communication remains a strategic asset.
For engineers and procurement officers, the key takeaways from the PRC 6020’s technical data are: Before diving into detailed analysis, here is the
When sourcing or integrating this radio, always refer to the manufacturer’s full technical manual (Barrett 6020 series manual, Doc. No. BCM-60200-XX) for board-level schematics, maintenance intervals, and firmware upgrade procedures.
For the most current RS HX PRC 6020 technical data, including firmware revision changes and optional module specifications, contact Barrett Communications or your authorized defense logistics provider.
Based on the alphanumeric string provided (RS HX PRC 6020), this appears to be a reference to a specialized industrial component, most likely a Heater Exchanger (HX) unit associated with PRC (Programmable Refrigeration/Cooling) systems, or a specific model of Heat Exchanger manufactured by a company using "RS" (such as RS Components or a similar industrial OEM) with the model series PRC 6020. When sourcing or integrating this radio
Because "PRC 6020" is a common industrial model designation for heat dissipation and "HX" is the standard engineering abbreviation for Heat Exchanger, this write-up focuses on the technical data surrounding a Heavy-Duty Industrial Heat Exchanger Unit typical of this nomenclature.
Below is a technical write-up based on the typical specifications and engineering data for an RS HX PRC 6020 class component.
A standard PRC-6020 operational set usually includes: