Urmet 1131 Manual Full Today
A: Check Urmet's website for the latest revision. Rev 4.0 (released 2021) includes updated wiring distances for LED lighting interference.
A: No, not directly. The 1131 is pure analog 2-wire. You would need an adapter like the Urmet 1130/92 gateway.
Once you have the full Urmet 1131 manual, here is how to interpret the most important chapters. urmet 1131 manual full
| Symptom | Possible Cause | Action |
|---------|----------------|--------|
| No BUS LED | Power missing | Check L1/L2 voltage (24-30V DC) |
| Cannot enter programming | Wrong code / phone type | Use analog phone; reset to default (see manual) |
| Forwarding number not dialed | Line seizure fails | Check PSTN line tone; add prefix *03 for dial tone delay |
| Relay does not trigger | DTMF not recognized | Ensure phone sends long tone; check DTMF sensitivity setting |
| Call forwarded too quickly | Ring timeout too short | Increase *02 value |
Manual Reference: Section 6.2 – "Video Troubleshooting." Solution: A: Check Urmet's website for the latest revision
This write-up is a draft summary. For complete wiring schematics, compliance data, and advanced features (e.g., bus device addressing, audio level adjustment), always refer to the official Urmet 1131 full manual provided by Urmet S.p.A.
The Urmet 1131 is an analog, surface-mounted, 4+n wire intercom designed to replace models like the Urmet 1030 or 730. Key connections include CA (Call), 1 (Speaker), 2 (Microphone), 6 (Common), and 9/10 (Lock Release), with installation requiring careful mapping of existing wires to these terminals. For the full technical data sheet, refer to Intercoms R Us. Connecting and Replacing Old Intercom with New Urmet 1131 This write-up is a draft summary
The Urmet 1131 system is part of the Urmet 2Voice (or similar) wired video door entry range. A "full manual" typically includes three distinct documents: System Technical Manual (for installers), User Manual (for residents), and Programming Manual.
Since I cannot directly attach PDF files, here is how to get the complete official manual and a summary of the critical technical sections you are likely looking for.
| Terminal | Signal | |----------|--------| | L1 / L2 | 2-wire BUS (to Urmet riser / power supply) | | TEL LINE | Incoming PSTN line (from Telecom socket) | | TEL SET | Optional parallel telephone | | NO / C / NC | Relay 1 (e.g., electric lock) | | NO2 / C2 / NC2 | Relay 2 (e.g., auxiliary) | | +12V / GND | Optional external power (if not powered via BUS) |