The Usbtv007 driver for Windows 10 64-bit is tricky because the market is flooded with clones.
Note: Because these drivers are often unsigned and hosted on third-party sites, always run a virus scan on any downloaded driver packages before installing them.
Setting up the Usbtv007 driver on Windows 10 64-bit can be tricky since these capture devices often lack official manufacturer support. However, with the right steps, you can get your EasyCap device working to digitize old VHS tapes or monitor security cameras. Step 1: Download the Correct Driver
Because "EasyCap" is a generic brand name, several chipsets exist. For the Usbtv007 (often labeled as SM-USB-007 or SMI Grabber Device), you need specific 64-bit files.
Manual Download: You can find verified community drivers on repositories like GitHub (samuelcarreira) or DriverScape.
Version Note: Version 1.0.8.28 is highly recommended for Windows 10 64-bit stability. Step 2: Manual Installation (The Most Reliable Method)
Windows 10 often fails to automatically recognize these devices, identifying them only as an "Unknown Device" or "usbtv007" with a yellow exclamation mark.
Extract the Files: Unzip your downloaded driver package to an accessible folder.
Open Device Manager: Right-click the Start button and select Device Manager. Locate the Device: Look for "usbtv007" or " SM-USB-007
" under "Other devices" or "Sound, video and game controllers".
Update Driver: Right-click it and choose "Update driver" > "Browse my computer for drivers".
Direct to Folder: Navigate to the extracted folder (specifically the win7_64 folder, which is compatible with Win 10 64-bit) and click Next.
Confirm: Once installed, the device should appear as "OEM Device" or " SMI Grabber Device ". Step 3: Recommended Software
Once the driver is active, you need a program to view or record the video feed.
OBS Studio: A top free choice for recording and deinterlacing old analog signals.
VirtualDub: A lightweight alternative for simple video capture. Troubleshooting Common Issues
Core Isolation/Memory Integrity: On newer versions of Windows 10/11, you may need to disable Core Isolation in Windows Security settings for the driver to load properly.
Interference: Plug the device directly into the back of your PC (motherboard ports) rather than a USB hub or front panel to ensure stable power and minimal signal noise.
Hardware Check: Many "failed driver" issues are actually due to poor-quality USB cables. If you experience frequent disconnects, try a higher-quality extension cable.
Looking for a specific capture software recommendation or having trouble with a "Code 10" error?
Installing the (often branded as EasyCap or Easier Cap) video capture device on Windows 10 64-bit can be challenging because official, modern drivers are often unavailable. The device often identifies itself as "usbtv007" or "SMI-USB 007".
Here is a detailed, tested approach to getting this card working on 64-bit systems. 1. Identify Your Hardware
Check Device Manager: Plug the device into a USB 2.0 port. Open Device Manager (right-click Start > Device Manager). Locate Device:
Look under "Sound, video and game controllers" or "Other devices" for " ", " SM-USB 007 ", or "Unknown Device".
Verify VID/PID: Right-click the device, go to Properties > Details > Hardware IDs. It should be USB\VID_1B71&PID_3002. 2. Required Drivers (Win 7/8 64-bit work for Win 10)
Because this is an older device, Windows 10 drivers are rare. You must use the Windows 7 64-bit driver (often called UTV007_Drivers.zip or STK1160).
Recommended Source: Scott Danesi's Site (UTV007_Drivers.zip) or GitHub/samuelcarreira (EasyCap-SM-USB-007).
Alternative: The Visser.io driver repository also lists several compatible packages. 3. Installation Steps
Extract the Driver: Download and extract the driver zip file to a known folder.
Disable Driver Signature Enforcement: Windows 10 may block the driver. Go to Settings > Update & Security > Recovery. Click Restart now under "Advanced startup."
Choose Troubleshoot > Advanced Options > Startup Settings > Restart. Press 7 or F7 to disable Driver Signature Enforcement. Install the Driver:
Go back to Device Manager, right-click the "usbtv007" (or unknown device), and select Update driver. Select "Browse my computer for drivers". Usbtv007 Driver Windows 10 64 Bit
Select the folder where you extracted the drivers (ensure "Include subfolders" is checked).
Confirm Installation: The device should now appear as "OEM Device" or "SMI Grabber Device" under Sound/Video controllers. 4. Software Setup (Capturing Video)
The driver only allows Windows to recognize the hardware. You need software to see the video. OBS Studio: The most recommended free software. Add a new Video Capture Device source. Select "OEM Device" or "SMI Grabber". Select input as Composite or S-Video. Alternative Software: PotPlayer or VLC Media Player. 5. Troubleshooting Tips
Code 10 Error: Plug the USB directly into the computer rather than a USB extension cable or hub. Black Screen/No Image:
Ensure the video standard (PAL/NTSC) is set correctly in OBS.
Check that the RCA/S-Video cables from your VCR are plugged into the input ports on the EasyCap.
Driver Loop: If the driver doesn't stick, run setup.exe as Administrator within the extracted driver folder instead of using Device Manager. To make this work seamlessly, I can help you with:
Finding a specific mirror for the driver if the links above don't work.
Configuring OBS specifically for this device to avoid black screens. Resolving "Code 10" errors if you are getting them.
The USBTV007 driver is essential for using the Fushicai USBTV007
video capture adapter (commonly known as an EasyCap clone) on Windows 10 64-bit. This device allows you to digitize analog video from sources like VCRs and camcoders by converting RCA or S-Video signals into a digital format. Key Driver Features
Compatibility: Supports Windows 7, 8, 8.1, 10, and 11 in both 32-bit and 64-bit architectures.
Video Formats: Capable of capturing both PAL and NTSC standards at resolutions up to 720x480.
Recognition: Once correctly installed, the device is typically listed in the Device Manager as an "OEM Device" or "SMI Grabber Device". How to Install on Windows 10 64-Bit
Since this is legacy hardware, Windows often fails to detect it automatically. Follow these manual steps: EasyCap / Easier Cap (usbtv007) Drivers and Installation
Finding the right driver for the USBTV007 (often sold as an EasyCap video grabber) on Windows 10 64-bit can be tricky because there is no single "official" website for these generic devices. 📥 Recommended Driver Sources
Since these devices are made by various manufacturers (like Fushicai or SMI), you often have to rely on community-verified archives:
GitHub (Verified Repository): The EasyCap-SM-USB-007-Windows-10-x64-drivers repository contains the necessary .inf files specifically for 64-bit systems.
DriverScape: You can find the SM-USB 007 driver (Version 1.0.8.28) which supports Windows 10 64-bit on DriverScape.
Visser I/O Archive: This site hosts a comprehensive list of EasyCap drivers, including the UTV007 and SMI Grabber versions. 🛠️ How to Install (Step-by-Step)
If you have an "Unknown Device" in your Device Manager, follow these steps to force the installation: Identify your Hardware ID: Open Device Manager.
Right-click the unknown device (often labeled SM-USB 007) and select Properties.
Go to the Details tab and select Hardware Ids. Look for USB\VID_1B71&PID_3002 (this confirms it is a UTV007 chip).
Download and Extract: Download the ZIP file from one of the sources above and extract it to your desktop. Manual Driver Update: Right-click the unknown device in Device Manager again. Select Update driver > Browse my computer for drivers. Point it to the extracted folder.
If it still doesn't work, right-click the .inf file (e.g., SmiUsbGrabber3C.inf) inside the folder and select Install.
Check Results: The device should now appear under Sound, video and game controllers as "SMI Grabber Device" or "OEM Capture". 💡 Pro Tips for Best Performance
Software Choice: The drivers usually don't come with viewing software. Most users use the free OBS Studio or VLC Media Player to view and record the video signal.
Video Standard: Ensure you set the correct video standard (PAL for UK/Europe, NTSC for USA/Japan) in your capture software settings to avoid black-and-white or flickering video.
USB Power: These devices can be heavy; plugging them into a front-panel USB port can sometimes lead to loose connections. Use a rear motherboard port for better stability.
🌟 Note: Always create a System Restore Point before installing manual drivers to ensure you can revert if the driver is incompatible with your specific version of Windows 10.
Are you getting a specific error code (like Code 10 or Code 28)? Plug in the USBTV007 device
What device are you trying to connect (VCR, Camcorder, etc.)? samuelcarreira/EasyCap-SM-USB-007-Windows-10-x64-drivers
Title: The Last Driver on Earth
Leo’s palms were sweaty. Not from fear, but from the slow, agonizing creep of the Windows 10 progress bar.
It had been three hours.
On his screen, a blue window displayed the dreaded message: “We’re setting things up for you. This might take a few minutes.”
Leo wasn’t born yesterday. He knew that “a few minutes” in Windows time was a black hole where hope went to die. But he couldn’t reboot. Not now. Not when the device in question was the last piece of his late grandfather’s legacy: a cheap, plastic EasyCAP USB dongle.
Inside that dongle was the USBTV007 chip.
To the world, it was e-waste. A relic from 2012, designed to capture grainy composite video from VCRs and camcorders. But to Leo, it was the only key to digitizing 80 hours of family tapes—his grandfather’s silent films, his mother’s first steps, the barbecue where his dad still had hair.
The problem? Microsoft, in its infinite wisdom, had signed a driver for the USBTV007 back in Windows 7. Then, with Windows 10’s 64-bit architecture, they had slammed the door shut. "Unsigned driver," the system had barked. "Error 52. This driver has been blocked from loading."
Leo had tried everything.
He’d hunted through forums from 2015, where ghostly usernames like "VHS_Savior" and "RetroGamer99" whispered ancient commands: "Disable Secure Boot." "Use bcdedit /set testsigning on." "Download the patched usbtv007.sys from the Russian mirror."
He’d even bought a second-hand Windows 7 laptop from a thrift store, only to watch its battery swell like a sad balloon.
Now, at 11:47 PM, surrounded by empty coffee mugs, he was performing the final ritual.
He had disabled driver signature enforcement. He had pressed F8 with the fury of a thousand clicks. And he was manually pointing Device Manager to a folder named USBTV007_FINAL_FIX_REAL—a folder that contained the fabled 64-bit .sys file, a patch by a developer known only as "Linuxtage."
The progress bar on the "Update Driver" dialog was frozen at 67%.
Leo leaned closer to the monitor. The cheap plastic dongle blinked its single, angry red LED. He whispered to it, "Come on, you little bastard. Work."
Click.
The screen flashed. For one heart-stopping second, the dialog turned white. Then, a green checkmark appeared.
"Windows has successfully updated your driver."
Leo exhaled a breath he didn't know he was holding. He opened OBS Studio. He clicked "Video Capture Device."
And there, in a small, pixelated window, was his grandfather—fuzzy, full of scanlines, and laughing at a joke from 1987.
The USBTV007 driver for Windows 10 64-bit wasn't just a file. It was a time machine held together with duct tape, forum threads, and sheer stubbornness. And tonight, it had worked.
He leaned back, smiling. The dongle’s red light glowed steadily, like a tiny, victorious heart.
The End.
The USBTV007 (often branded as EasyCap or EasierCAP) is an analog-to-USB video capture device primarily used for digitizing VHS tapes or monitoring security cameras on a PC. While many modern versions of Windows 10 may automatically recognize the device using a generic driver from "Active Development Co Ltd," manual installation of older Windows 7 64-bit drivers is often required for full functionality. Key Technical Specifications
Hardware ID: Frequently identified as USB\VID_1B71&PID_3002.
Driver Version: Common stable version is 2.1.1.2 (dated 2011-06-08).
Recognition Name: Once correctly installed, the device typically appears in Device Manager as "OEM Device" or "SMI Grabber Device". Installation Guide for Windows 10 (64-bit)
Manual installation is the most reliable method for 64-bit systems:
Download Drivers: Secure a compatible driver package, such as the UTV007 Drivers on ScottDanesi.com or the Windows 10 x64 drivers on GitHub.
Open Device Manager: Right-click the Start button and select Device Manager. The Usbtv007 driver for Windows 10 64-bit is
Locate Device: Find the entry labeled "usbtv007" or "Unknown Device" (often under "Other devices" or "Sound, video and game controllers"). Update Driver: Right-click the device and select Update driver. Choose "Browse my computer for drivers".
Navigate to the extracted driver folder (specifically looking for the Win7_64 subfolder).
Confirm Installation: The device should now be listed as a functioning capture source in software like OBS Studio. Troubleshooting & Security Considerations
To install the USBTV007 (EasyCap) driver on Windows 10 64-bit, you generally need to manually point Windows to the Windows 7 64-bit
driver files, as modern Windows versions may not recognize the device automatically. Once correctly installed, the device typically appears as "SMI Grabber Device" or "OEM Device" in your system. Step-by-Step Installation Guide Download Driver Files
Since there is no official manufacturer website, you must use community-verified drivers. Reliable sources include GitHub (samuelcarreira) or independent tech blogs like Scott Danesi Download and file to a folder on your desktop. Connect Device Plug the EasyCap adapter into a USB port on your computer. Open Device Manager Right-click the Start button and select Device Manager Look for an "Unknown Device" or a device labeled SM-USB 007 (often under "Other devices" with a yellow warning icon). Manually Update Driver Right-click on the device and select Update driver "Browse my computer for drivers"
"Let me pick from a list of available drivers on my computer" or browse directly to the folder you extracted earlier. Crucial Step : Navigate specifically to the
folder within the extracted files. Windows 10 is compatible with these 64-bit Windows 7 drivers. Verify Installation If successful, the device should now be listed under Sound, video and game controllers "SMI Grabber Device" "OEM Device" Recommended Software
After the driver is active, you will need software to view or record the video feed: OBS Studio
: Highly recommended for modern systems. Add a "Video Capture Device" source and select the OEM device. : Good alternatives for simple viewing.
: Often included with the original CD, though it may be dated. Troubleshooting Common Issues Code 28 Error
: This means the driver isn't installed. Repeat the manual update steps above. Black Screen/No Audio
: Ensure you have selected the correct Video Standard (e.g., ) in your software settings to match your input source. Privacy Settings Windows Settings > Privacy > Camera
and ensure that "Allow apps to access your camera" is turned , otherwise software like OBS cannot see the video feed. OBS Studio specifically to start capturing your video tapes? EasyCap / Easier Cap (usbtv007) Drivers and Installation
The Usbtv007 chipset—often found in inexpensive USB-to-analog video capture devices and TV tuners—provides a low-cost way to digitize composite, S-video, or TV signals. Because many of these devices were designed around older Windows versions, getting them to work smoothly on modern Windows 10 64-bit systems can require careful driver selection, configuration, and troubleshooting. This essay explains what the Usbtv007 device is, why driver compatibility matters on 64-bit Windows, where to obtain drivers, how to install them safely, common problems and fixes, and best practices for stable operation.
What the Usbtv007 Is
Why Driver Compatibility Matters on Windows 10 (64-bit)
Where to Obtain Drivers
Safe Installation Steps (recommended order)
Common Problems and Fixes
Using Usbtv007 Devices with Modern Software
Alternatives if Drivers Fail
Security and Practical Tips
Conclusion Usbtv007-based capture devices can still be a functional, budget-friendly solution for digitizing analog video on Windows 10 64-bit systems, but they require careful driver handling due to signature and compatibility constraints. Start by identifying the device hardware IDs, try Windows Update, prefer signed drivers from the vendor, and if necessary use temporary driver signature enforcement only as a last resort. For long-term reliability and easier setup, consider upgrading to a UVC-compliant capture device that is plug-and-play on modern systems.
Related search suggestions (You may ignore these when not needed.)
In an era of streaming sticks and 4K HDMI capture cards, the Usbtv007 remains a cult classic among tech enthusiasts, cord-cutters, and archivists. This unassuming yellow dongle—often sold under generic names like "EasyCAP" or "USB Video Capture Card"—allows users to digitize analog video from VHS tapes, camcorders, and old gaming consoles.
However, the Achilles' heel of this device has always been driver support. With the transition from Windows 7 to Windows 10 (and now Windows 11), millions of users have been left staring at an "Unknown Device" error in Device Manager. Specifically, finding a stable Usbtv007 Driver Windows 10 64 bit that doesn't crash or introduce audio lag is a notorious challenge.
This article provides a definitive, step-by-step guide to finding, installing, and troubleshooting the driver for the USBTV007 chipset on modern 64-bit Windows 10 systems.
A community-maintained driver exists, often bundled with video software.
Best source: The USBTV007 driver included with OBS Studio (via "Auto-Install" option) or standalone from GitHub.
If your hardware ID matches the Fushicai chipset (VID_534D), you have a device that is natively supported by newer versions of Windows, but the driver often fails to install automatically via Windows Update.
