Climazon Millenium Manual Install | Wella

Introduction: Understanding the Wella Climazon Millenium

The Wella Climazon Millenium is an industry icon. For decades, this multipurpose processor (MPP) has been the backbone of professional salons, serving as a combined hair steamer and dryer. Unlike standard hood dryers, the Climazon Millenium is known for its adjustable height, rotating arm, and dual functionality (warm air for color processing and steam for conditioning).

However, moving salons, replacing parts, or setting up a second-hand unit often requires a Wella Climazon Millenium manual install. Without the original paperwork—or if the unit has been disassembled—this process can feel daunting.

This article provides a complete, verified installation manual. We will cover unpacking, mechanical assembly, electrical safety, and calibration.

Important Disclaimer: Always disconnect the unit from the mains power before attempting any installation or repair. If you are not qualified to handle electrical wiring, hire a licensed electrician. This guide is for informational purposes referencing official Wella service manuals.

Before you physically mount the dryer, verify the following. Ignoring these steps is the #1 cause of warranty voidance and electrical failure.

Elena grabbed a rolling stool and sat in front of the machine. She reached out and swung the hood over her head. The ergonomic handgrip was cool to the touch. She tilted the visor;

Installing a Wella Climazon Millennium (or the updated Climazon 2) requires precise mounting to ensure the heavy articulating arm is secure and the electrical components are safe.  Quick Setup Guide & Resources 

For the Wall-Mounted Version, the system typically uses the Acrobat 2004 arm (Types WA04/75 or WA04/95). 

Official Installation PDF: You can find the comprehensive manual for the appliance head and wall arm on the Wella Professionals Climazon Page.

Alternative Manual Access: Technical details for mounting and maintenance are also hosted on ManualsLib.  Key Installation Steps  Component  Installation Detail Wall Mount

Must be fixed to a load-bearing wall using the specific Wandlager Typ WL04. Height Adjust wella climazon millenium manual install

The Spring Arm (Federarm) has a specific opening (b) for setting the height stop and another (c) for adjusting load capacity. Electrical

Ensure the main ON/OFF switch (8) is accessible and the plug (b) is correctly seated in the wall outlet. Arm Tension

Use the two brake screws (8) on the boom to adjust how easily the arm swings. Safety & Maintenance Tips 

Cool Down: Before any maintenance or cleaning, let the device cool for at least 10 minutes.

Cleaning: Use a soft, damp cloth with mild detergent; never use flammable substances like gasoline or lacquer thinner.

Sensors: The Millennium/Climazon 2 features infrared sensors that protect the client's ears and face; ensure these filters are kept clean for accurate temperature control. 

Installing a Wella Climazon Millenium requires different setups depending on whether you are using a mobile floor stand wall-mounted arm . For safety, wall-mounted installations

be performed by a technical specialist or qualified electrician to ensure secure fixing and proper electrical connection. Wella Professionals Installation Configurations

The Wella Climazon is compatible with several mounting systems, most commonly the Acrobat 2004 arm or the ST5 pedestal Wella Professionals Wall Version

: Typically uses the Acrobat 2004 Wandarm (Type WA04/75 or WA04/95). Floor Version

: Utilizes the ST5 tripod foot with three rollers and an ST5 tripod tube. Other Options Before you physically mount the dryer, verify the following

: Approved variants include ceiling mounts (DB04/2), floor-fixed mounts (BB04/1 or BB04/2), and furniture flanges (FM04). Wella Professionals Critical Installation & Safety Steps Specialist Assembly (Wall-Mount)

: The wall version requires precise electrical work and high-strength wall fixing. Professional installation is mandatory to prevent the unit from falling. Spring Arm Caution

: The wall-mounted arm contains a high-tension spring. Never dismantle the arm without following the specific safety release protocols in the Wella Climazon Manual to avoid sudden recoil and injury. Pedestal Compatibility

use the appliance with the older Wella ST3 pedestal. The unit may become unstable and fall, causing injury. Device Setup Ensure the main ON/OFF switch (8) is accessible.

For tripod versions, use the cable holder (9) to secure the power lead to the ST5 stand.

Check that the five heating elements—including the foldable side arms—can move freely into their three adjustable positions. Wella Professionals Technical Specifications Mains Voltage : AC 220–240 V. Mains Frequency : 50/60 Hz. Rated Power : 1,350 W. Components

: Features a digital control panel, integrated temperature sensors with protective filters, and adjustable side arms for uniform heat distribution. Wella Professionals

For detailed wiring diagrams or specific mounting plate dimensions, consult the official Wella Acrobat 2004 Installation Guide programming steps

for setting up specific color or drying treatments once the installation is complete?

The Wella Climazon Millennium (and its successor, the Climazon 2) is a professional hair-drying and heat-treatment device that can be installed in two primary configurations: as a pedestal/stand version or a wall-mounted version. Installation Configurations

Pedestal (Stand) Version: Uses the ST5 tripod base. This setup includes a mobile base with three rollers and a tripod tube for portability within the salon. Before you physically mount the dryer

Wall-Mounted Version: Typically utilizes the Acrobat 2004 wall arm (models WA04/75 or WA04/95). This arm consists of a boom and a spring arm for flexible positioning. Key Installation Components

Based on official Wella Professionals documentation, the following mounting variants are supported: Wall Bearing (WL04): The base mount for wall installations.

Ceiling Mounting (DB04/2): For salons requiring overhead heat sources.

Floor Mounting: Options include one-piece (BB04/1) or two-piece (BB04/2) floor mounts.

Furniture Flange (FM04): For mounting directly onto salon furniture structures. Standard Specifications for Install Power Supply: Requires a standard 220V–240V outlet.

Dimensions: Approximately 1350mm high, 850mm deep, and 600mm wide (mobile version).

Safety Features: Includes a main ON/OFF switch and a cable holder specifically for the pedestal version to secure the power line. Installation Resources

For detailed step-by-step visual guides and specific technical load-bearing requirements, you can download official manuals directly from the Wella Professionals Appliance Page. Commonly used manuals include: Climazon S4 Appliance Head Manual Acrobat 2004 Wall Arm Manual.

Here is useful, practical content regarding the installation of the Wella Climazon Millennium (a professional hair processing machine / dryer).

Important Note: Wella no longer publicly distributes the full original service manual for this discontinued model. The following information is compiled from certified technician notes, common installer best practices, and safety regulations.