The documentation link depends on how you access the data:

The direct documentation links for integrating Xovis sensors are the Xovis Postman API Network Hub for Sensor V5 OpenAPI specs, and the official Xovis Support Portal for authorized hardware manuals and developer resources. 🚀 Unlocking Real-Time People Flow with the Xovis API

Data-driven decision-making hinges on high-accuracy location intelligence. Integrating 3D sensors into custom software can maximize the potential of physical spaces.

Whether optimizing airport security queues or analyzing retail conversion rates, the REST API and data push protocols let developers pull raw foot traffic data directly from the edge. 🌐 Where to Find the Documentation

Navigating API connections requires access to the correct developer repositories:

Postman API Network: Explore complete endpoint schemas on the Xovis Postman Workspace for sensors running firmware 5.0 and higher.

Xovis Support Desk: Pull detailed technical data sheets and setup guides directly via the Atlassian-managed Xovis Support Portal.

Official Insights: Read about system integrations on the Xovis API Overview Page . 🛠️ Key Capabilities of the Xovis API

Building custom analytics engines is supported by extensive edge-computed data options: Sensor V5 API | Documentation | Postman API Network

Official Xovis API documentation is primarily hosted within the Xovis HUB Partner Platform. While public marketing materials highlight their REST API and data push capabilities, detailed technical specifications typically require a partner login. Official Documentation & Access

Xovis HUB: The central repository for the latest software versions, technical manuals, and API documentation for partners.

Support Portal: A Jira-based desk for troubleshooting and specific technical inquiries.

Sensor V5 API (Postman): An OpenAPI specification for Xovis sensors with firmware 5.0+, covering authorization and data retrieval. Key Integration Features

Data Retrieval: Supports both a REST API for pulling data and Data Push options (via HTTPS, SFTP, or MQTTS) for real-time telemetry.

Device Control API: Available through the Xovis IBEX platform, allowing for remote sensor management and categorization.

Format Compatibility: Data is typically delivered in JSON or XML formats depending on the sensor status and data type. Third-Party Integration Guides

For specific software environments, you may find these external guides useful: Full-featuring APIs - Xovis

Introduction to Xovis API Documentation

Xovis is a cutting-edge technology company that provides innovative solutions for various industries. Their API (Application Programming Interface) allows developers to integrate Xovis' products and services into their own applications, enabling a wide range of possibilities for customization and innovation.

Xovis API Documentation Link

The Xovis API documentation is a comprehensive resource that provides developers with the information they need to get started with integrating Xovis' products and services into their applications. You can access the Xovis API documentation through the following link:

[Insert actual link to Xovis API documentation]

Overview of Xovis API Documentation

The Xovis API documentation is a detailed guide that covers everything from getting started with the API to advanced topics such as authentication, data formats, and error handling. The documentation is designed to be easy to follow and includes:

Benefits of Using Xovis API Documentation

The Xovis API documentation provides numerous benefits to developers, including:

Conclusion

The Xovis API documentation is a valuable resource for developers who want to integrate Xovis' products and services into their applications. With its comprehensive coverage of API endpoints, authentication methods, data formats, and error handling, the documentation provides everything developers need to get started and succeed. By accessing the Xovis API documentation through the provided link, developers can unlock the full potential of Xovis' innovative solutions.

The fluorescent lights of the airport control center hummed, a low-frequency drone that matched the headache throbbing behind Maya’s eyes. It was 2:00 AM, and the passenger flow data was simply... gone.

"System's been down for forty minutes," David, the shift supervisor, said, pacing the small room. "Operations is flying blind. If we don't get the queue times for Terminal C before the morning rush, we’ll have a riot on our hands."

Maya stared at the monitor. It displayed a spinning wheel of death. The Xovis sensors—mounted like unblinking black eyes in the ceiling—were working fine; she could see the raw stream on the backup server. But the dashboard that calculated wait times and occupancy was unresponsive.

"I need to bypass the dashboard," Maya muttered, rubbing her temples. "I need to query the sensors directly."

"You can't," David said. "The GUI is the only interface we have permission for."

"There's always a back door," Maya said, grabbing her laptop. She knew Xovis sensors were sophisticated; they ran on a Linux core and had a REST API for integration. She just didn't know the endpoints.

She typed furiously, accessing the sensor’s local IP address. A prompt appeared: Authentication Required.

"Okay," she whispered. She knew the admin credentials, but she didn't know the syntax. Was it /api/v1/data? /stream? /occupancy? Trial and error would take hours she didn't have.

She pulled up her browser, her fingers hovering over the keyboard. She needed the bible. The map.

She typed the query into the search bar: xovis api documentation link.

She hit Enter. The search results loaded in a flash.

Result 1: Xovis Support Portal. Result 2: Developer Integration Guide. Result 3: Xovis PC/AX API Reference v3.2.

"Gotcha," Maya breathed. She clicked the third link. A PDF opened, dense with technical jargon, JSON schemas, and curl commands. She scanned the table of contents, her eyes locking onto Chapter 4: REST API Endpoints.

She scrolled down. There it was. The endpoint for real-time occupancy data: GET /api/1.0/flow/realtime.

"David, I need to whitelist my IP for port 443," Maya said, her voice steady now.

"Why?"

"Just do it. I’m pulling the data raw."

David hesitated, then nodded to the network engineer in the corner. A few keystrokes later, the firewall was open.

Maya looked back at the documentation. It required a specific JSON payload for the query. She copied the example from the PDF, adjusted the sensor ID for Terminal C, and opened her terminal window.

She typed the curl command, her heart beating a little faster.

curl -X GET -H "Authorization: Basic [TOKEN]" https://192.168.1.45/api/1.0/flow/realtime

She pressed Enter.

For a second, nothing. Then, a stream of text flooded her terminal window.

"sensorId": "XC-1002", "zone": "Terminal C Checkpoint", "occupancy": 24, "avgWaitTime": 180

"It's working," Maya said, a smile breaking through. "Occupancy is 24. Wait time is 3 minutes. It's low, but we have eyes on it."

"Can you get it back into the main dashboard?" David asked.

"Give me ten minutes," Maya said, her eyes darting between the documentation and her code editor. "I'll write a script to pipe this into our database. The link saved us. We’re back online."

The hum of the lights didn't seem so loud anymore. The morning rush was coming, but for the first time all night, Maya was ready for it.

To summarize, there is no single, universal, publicly indexed Xovis API documentation link. Instead, the ecosystem is protected and distributed.

Once inside, you’ll find one of the most accurate and reliable people-counting APIs on the market—built for real-time analytics, integration with BI tools (Power BI, Tableau), and custom dashboard development.

For further help, refer to the official Xovis Knowledge Base at https://support.xovis.com (login required). The API is your key to transforming high-fidelity sensor data into actionable business intelligence.

Here’s a short write-up you can use for internal documentation, a README, or a knowledge base article regarding the Xovis API documentation link.

If you cannot access the links above, please request API credentials from your Xovis account manager or contact Xovis Support directly via their official website.

In a high-stakes scenario at a bustling airport, a data architect successfully resolves a terminal bottleneck by accessing the Xovis API documentation to bypass a frozen system. By utilizing the API documentation and specific endpoints, the team is able to visualize real-time human movement and prevent a major traffic jam. You can explore the actual technical capabilities of the Xovis API.

Xovis provides comprehensive API resources for developers to integrate 3D sensor data into custom software environments

. Below is a draft you can use for sharing these documentation links. Direct API Resources Sensor V5 API (OpenAPI/Postman) : Access the latest OpenAPI specification for Xovis sensors (firmware v5.0 and higher) via the Postman API Network Full-Featuring APIs Overview : Review the official Xovis Insights page

for high-level details on REST API capabilities and data push options. Partner & Support Portals

For technical guides, firmware updates, and detailed manuals, use the following official platforms: Xovis HUB Partner Platform

: The primary entry point for partners to access product materials, training, and planning tools Xovis Customer Support Portal : Registered customers can log in to support.xovis.com Knowledge Base , FAQs, and support requests. Quick Implementation Guides AI Functions Guide : A quick-start PDF for Staff Exclusion and Gender Statistics Device Control : Information on managing sensors remotely through the HUB platform technical introduction for your documentation page, or are you looking for specific code samples for the Xovis REST API? Full-featuring APIs - Xovis

Once you obtain the correct link and log in, the documentation is comprehensive. Here is what to expect:

Responses are delivered in JSON or XML. The documentation includes example payloads for common queries, such as:

GET /api/v1/counts/current
Response:
"in": 124,
  "out": 98,
  "occupancy": 342,
  "timestamp": "2025-04-01T14:32:00Z"