Manual 8liech-sc-ssd - Viva Water Dispenser

| Specification | Detail | | :--- | :--- | | Model Number | 8liech-sc-ssd | | Product Type | Bottom-Loading Water Cooler / Dispenser | | Dimensions (HxWxD) | 39.5 x 12.5 x 14.5 inches (approx) | | Weight (Empty) | 24 lbs | | Hot Water Capacity | 1.2 Liters (pre-heated tank) | | Cold Water Capacity | 2.5 Liters (chilled tank) | | Cooling Type | Compressor-based (not thermoelectric) | | Heating Power | 500 Watts | | Cooling Power | 85 Watts | | Material | Stainless Steel (SSD), ABS plastic, Copper coils |

By following this manual for your viva water dispenser manual 8liech-sc-ssd, you will avoid 95% of common operational errors. If problems persist, do not disassemble the compressor unit yourself – contact a certified appliance technician.

Enjoy clean, instant hot and cold water from your Viva 8liech-sc-ssd!

Guide to the Viva Water Dispenser (Model: 8LIECH-SC-SSD) viva water dispenser manual 8liech-sc-ssd

Note: This guide is based on the standard operating procedures for the Viva 8LIECH series. While specific internal components may vary slightly, the user interface and maintenance procedures described below are standard for this model.

Here is the solution to the most frequent problems for the Viva 8liech-sc-ssd.

The Viva 8LIECH-SC-SSD is a freestanding water dispenser designed to provide instant access to hot, cold, and room-temperature water. It typically features a stainless steel tank for hygiene and a compressor cooling system. | Specification | Detail | | :--- |

Key Features:

Before plugging in your Viva 8liech-sc-ssd, read these critical safety rules.

When you unbox the Viva 8liech-sc-ssd, you should find: By following this manual for your viva water

Note: If the empty bottle sensor magnet is missing, the dispenser will flash a red “Empty” light even when full.

| Model | 8LIECH-SC-SSD | |-------|----------------| | Voltage | 110–120V / 220–240V (check local rating) | | Frequency | 50/60 Hz | | Heating power | 500 W | | Cooling power | 85 W | | Hot tank capacity | 1.0 L | | Cold tank capacity | 1.5 L | | Bottle type | 3 or 5 gallon bottom-load |

Cleaning the Drip Tray: The tray under the taps will collect overflow water. Slide it out gently, empty the water, wash with mild soap, and dry before replacing.

Cleaning the Exterior: Wipe the outside with a soft, damp cloth. Do not use abrasive cleaners, gasoline, or thinners.

Cleaning the Internal Tank (Descaling): If the water flow slows down or the taste changes, scale may have built up.